Jump to content

Parking Brake Efficiency - MOT Failure


Hoggy1972
 Share

Recommended Posts

Hi,

I have a 2006 Allroad 3.0 and i've just had an MOT failure on 'Parking Brake: Efficiency below requirements'. The car has recently (Jan '17) had a new set of pads and discs on the rear.

Anyone have any idea what could be the problem?. As its an electronic parking brake, its not adjustable, its either ON or OFF, so i'm a bit stumped as to what the problem might be.

Any help greatly received

Tim

 

Link to comment
Share on other sites


How long ago did you have new pads fitted? Although with new discs there shouldn't have been a problem with them settling in really.

While you are right that there is only an on off function like on my two main vehicles. Both of them have an adjuster where each (left and right) cable is linked, near the actuator. My guess is that it will be either a 10 or 12mm nut. Probably need a bit of penetrating fluid on it to get it moving. It will need tightening slightly

Can you not ask garage to adjust it up a bit for you or let you do it while it's on the ramps?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership