Jump to content


MRC stage 2


Bencymru75
 Share

Recommended Posts

Hi all.

I had my MRC stage 2 with stronic remap done a few months back and have now had time to settle in to it and do some 0-60 testing.

Its my DD and i usually poodle around getting 28mpg according to the on board computer. This hasn't really changed but i'm not sure how its calculated and probably doesn't factor in the additional fuel burn as a result of the modifications. However, 300+ miles is the norm per tank.

Cost - Very reasonable at £1600 all in.

process - nice and easy. I just dropped the car off and it was done in a few hours. The Dyno showed 485 before losses!!

The acceleration is amazing and the car just pulls and pulls. The sound of the supercharger is awesome but takes some getting used to.  

I ran some times on my VBOX sport as below :

Weather was dry, elevation varying a little and i had 3/4 tank of fuel.

Run 1 - 4.03 ESC on
Run 2 - 4.06 - ESC 0n
Run 3 - 3.89 - ESC off
Run 4 - 3.87 - ESC off
Run 5 - 3.64 - LC - This run had a very slight incline of 2m.

On a strip, I think it would go to 3.5 or better.

Its a completely different car but there are a few negatives;

1. Warranty could be affected. I only have a few months left anyway
2. Insurance is higher. Due to the BHP increase, mine increased from £385 to £600
3. Increased risk of drivetrain failure if you drive like a plank.
4. Might affect value when you come to sell. I think you need to keep mileage down and demonstrate meticulous maintenance.

 

I'll be selling my Vbox sport once i have a few more times if anyone fancies one!

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership