Karlos212 Posted April 25, 2018 Share Posted April 25, 2018 Hi guys, By the way this is my first post. I would like some help please, I have removed the air intake manifold and cleaned all the carbon mug inside the unit. My question is what position are the swirl flaps inside the manifold with the actuator vacuum bolted to the manifold. The metal control arm that opens and closes the flaps with the actuator vacuum has broken off. I plan is to use quick steel epoxy putty on the piece to hold it in place. Will the flaps been closed or opened when I use quick steel putty to bond the arm to the flap rod? In that picture 2 is the metal piece I need to attach to the rod for the flaps to open or close inside the manifold. I'm assuming actuator vacuum unit is bolted back onto the manifold the flaps are in the closed position I just need clarification this is correct? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.