AudiB7Q05 Posted June 21, 2020 Share Posted June 21, 2020 Hi, i am trying to remove the intercooler pipe on a 3L TDI B7 that runs along side of the engine on the UK drivers side. I am facing two problems. 1) The pipe is secured to a bracket towards rear of the engine. It is an 11mm nut with difficult access. I have managed to get a ratchet ring spanner on it and an open ended spanner on it but both are starting to round off the nut. It is not rusted in anyway. Any ideas 2) The pipe splits in two and goes in to two rubber hoses with jubilee clips. With both clips undone the upper hose came off easily but the lower hose will not budge at all. Any ideas? The reason that I am doing this is that I am replacing the steering rack and the intercooler pipe and starter cat converter below it both need to be removed before I can access the 3rd rack bolt. Quote Link to comment Share on other sites More sharing options...
AudiB7Q05 Posted June 21, 2020 Author Share Posted June 21, 2020 Looking at my own pic I have realised it is captive and having looked again at the there is a inaccessible torx screw in it! Quote Link to comment Share on other sites More sharing options...
Steve Q Posted June 23, 2020 Share Posted June 23, 2020 This video might help: Cheers Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.