Jump to content

Possible Timing Issue


frenchhr
 Share

Recommended Posts

2007 Audi Avant 3.2l with 41 k on the engine. The first pic is the reading after I changed both upper timing chain tensioners. The specs were off so I adjusted bank 1 this weekend and the numbers went down, and the engine is stronger. The P0366 CEL still comes on but it takes more driving though. 

What are the correct readings for a proper operation? I’ve attached photos of what the exhaust came looked like before I adjusted them by pulling both cams out with the timing tool. If the numbers are still off I’m at a loss. Both banks are perfectly lined up and I followed all procedures. Could it be the ECM, bad tensioner, or cam phaser. Thanks

99E40D31-BC28-44DD-87CD-4D2248BD7C7E.jpeg

0D3178D4-40CD-40BF-B878-62526C0D731F.jpeg

74AA8F3D-9AF2-49DB-8E94-D9F27182CD8C.jpeg

9D2DFF8C-D15A-4211-864B-91BA97E032FA.jpeg

788552CC-22AA-416D-BAE4-25E783A60C26.jpeg

F9DCB579-0A0A-4F8B-BCA8-6BE9954746EF.jpeg

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership