steven016

Bit of a long shot but wonder whether anyone could help with xenon coding.

Car is 2010 facelift that I am retrofitting with xenon with led drl. I am getting fault codes for bulbs M18/M19 side repeaters not working and drl not dimming with sidelight.

J519 is rev N.

I have tried coding 0015121 and 0012121.

Car is currently fitted with halogen's and coded to 0017121.

Using Kufatec adapters 33912-1.

Any ideas?

Many thanks

Steven Lomath.

Many thanks for the suggestions. Having spent several hours today on the A4 B7 group page on Facebook, I have found the name of the person who bought it from Coparts. I also found his original post on that group asking for suggestions to it's value. Hopefully I will follow up on this when time permits.

Many thanks for the suggestion. It is certainly worth a try. I think the moral of this is never act on impulse as it will be regretted. I have dragged out a picture of it. Happy memories.

Bit of a long shot but here goes. I sold my Audi A4 in August 19 due to a lack of time to get it mot'd. I now regret doing this.

I have checked with dvla and no logbook has been issued since Jan 18, which was by me.

I know it was sold via Coparts auction and subsequently is currently mot'd and taxed.

If anyone comes across GN57WVV Audi A4 Avant 3.0 TDI Quattro S-Line for sale, can they let me know as I am wanting to buy it back.

Last known location is Bexhill On Sea.

Many thanks.

Had this same problem a few years ago and it turned out to be a broken wire on the plug for the flapper. There is a 2 pin plug inside the headlight (very small), sitting beside the bulb. I would have a look at that before replacing the headlight as they are very expensive. As for part numbers, a quick web search suggests that one light may have been replaced but I would suggest checking with a parts specialist before ordering a new unit to be sure. I hope this helps.

I had the same problem a couple of years ago and it turned out to be a failing wiper motor. Mine wouldn't always work though and on occasions I would have to wiggle it to get it started.  

I am happy to report that changing the stalk has 100% solved the problem. 

Many thanks for your help. Forum seems to be very helpful from what I can see which is why I joined 🙂. I have been quoted £147 supply and fit for a new stalk so will get that done when I get the chance 🙂

Hopefully someone on here can help with a problem with my indicators/turn signals on my 57 plate avant.

Sometimes when I signal right, the left side flash a couple of times before changing to the right side. Signalling left is fine.

I have spent many hours searching online and am wondering whether the indicator stalk could be the culprit? Don't want to spend out on wrong part. Any suggestions? I have scanned several times with vagcom since this intermittent fault started and nothing showing up. Any help gratefully received.