ImJB

replace or blank the pcv, replace the dv . What’s the worse that could happen

Hold the unlock button , insert key into ignition while holding button turn car on whilst still holding the unlock button . Turn car off remove key then release unlock button.

I have to do this every time when battery is disconnected.

good luck 

I swapped my steering wheel over from a 4 spoke without mf controls to a nice 3 spoke mfsw with paddles.

I changed the clock spring because it was the one with only 6 connectors to the 12 pin connector.

the module for cruise and mfsw is already installed.

long story short. Steering wheel is working, cruise is working, controls function properly and illuminate no coding needed for the controls. The paddles illuminate but do not work at the moment obviously some coding will be needed.

The problem is that after this install I have the air bag light and tc light illuminated usually these clear after short drive but the are not clearing, had my mate check with his good machine and got 

P1854 code

Any ideas what I’ve done wrong here I don’t like the lights any input would be appreciated.

cheers John 

Going to need some help with the old beast so have joined up to a active site . Nice one guys 👍👍