Mr G

PRICE: £150 ono AUDI A6 C7 17" INCH ALLOY WHEELS & 225/55/17 TYRES. GENUINE SET OF 4 MANUFACTURE PART CODE: 4G0601025BH THESE ARE THE 10-SPOKE STYLE AND ARE A STANDARD FIT ON THE AUDI A6 C7. MAY FIT A6/A4/A5/ETC AND MAYBE OTHERS BUT PLEASE CHECK TO SEE IF THEY FIT YOUR VEHICLE CODES OFF THE BACK OF THE WHEELS: - 8Jx17H2. - ET39 - 4G0601025BH - REG 002454 - AU053 K1 - AlSi7Mg - MADE IN AUSTRIA - AA3 WHEELS ARE IN PRETTY NICE CONDITION. ONE WHEEL HAS SOME MINOR GRAZING ON TWO OF THE SPOKE AND A SMALL CHIP ON 2 OF THE OTHER SPOKES, ANOTHER WHEEL HAS A MINOR MARK ON THE OUTER EDGE, THE OTHER 2 LOOK PRETTY CLEAN. MAY BE OTHER AGE RELATED MARKS HERE OR THERE BUT NOTHING SIGNIFICANT ENOUGH TO MENTION. COME WITH 225/55/17 TYRES. ALL MATCHING TYRES - TWO TYRES HAVE AROUND 4-5MM TREAD REMAINING - TWO TYRES HAVE AROUND 3-4MM TREAD REMAINING HOWEVER HAVE SOME WEAR ON THE OUTER EDGE, SUSPECT THESE WERE FRONTS AND THE TRACKING WAS OUT. (ALL TYRES LOOK TO HAVE LEGAL TREAD SO COULD BE DRIVEN AWAY ON) ALL TYRES HOLDING AIR PERFECTLY. **CENTRE CAPS ARE NOT INCLUDED** NO CRACKS, CANNOT SEE ANY FLATSPOTS OT BUCKLES. CANNOT SEE ANY PREVIOUS WELDS. I'VE TAKEN THESE IN PART EXCHANGE BUT I HAVE NO USE FOR THESE SO SELLING THEM IN. I WOULD CONSIDER A PART/EXCHANGE WITH YOUR OLD ALLOY WHEELS, I AM LOOKING FOR A SET OF A3 18 INCH (7.5J) WHEELS/RIMS WITHOUT TYRES PREFERABLY. CASH ON COLLECTION IS PREFERRED PLEASE. If you want delivery, this will be via courier and will cost you £55. PRICE NEGOTIABLE, TRY ME IF INTERESTED.

Sadly no. I've part ex'd them with another set, ironically a set I dont need so they may appear here.

SOLD

Absolutely yes, I have learned to ignore it as it does just look like water. Car does short journeys mainly so as you say, hopefully just vapour and nothing to worry about. Thank you.

Hi all, I've been noticing a really odd water drip when we reverse the A3 onto the drive, its just leaves a small trail. It did it again at the weekend and I go underneath an noticed water leaking from the exhaust, but there was nothing leaking above it and the exhaust isnt rusty or blowing, so no wear/tear holes. I did a quick google search and it transpires this is quite common, however is this normal? I've never seen this before so I am "baffled", pardon the exhaust pun. Have you guys also got this? Is it normal? Should I be concerned or remediate some way? Thanks.

SET OF 4, AUDI A6 S-LINE 18" INCH ALLOY WHEELS & GOOD TYRES. MANUFACTURE PART CODE: 4K0601025D CAME OFF A AN AUDI A6 C8, MAYBE THE ALLROAD QUATTRO ALSO. CODES OFF THE BACK OF THE WHEELS: - E 8Jx18H2. - ET39 - 4K0601025D - DOT - 008868/2013 - AlSi7M - AUSTRIA - AA3 - AU191 K4 WHEELS ARE IN PRETTY NICE CONDITION. ONE WHEEL HAS A MINOR GRAZE ON THE EDGE OF THE SPOKE AND EDGE OF RIM, WHICH HAS BEEN TOUCHED UP SO YOU CAN HARDLY TELL. THERE ARE A COUPLE OF VERY MINOR MARKS ON A COUPLE OF OTHER WHEELS. COME WITH 225/55/18 TYRES. - TWO TYRES HAVE AROUND 5-6 MM TREAD REMAINING - ACCELERA IOTA ST68. - ONE TYRE HAS AROUND 3 MM REMAINING BUT HAS SOME MINOR EDGE WEAR - TOYO PROXES. - ONE TYRES HAS AROUND 3-4 MM TREAD REMAINING - MICHELIN PRIMACY 4 ALL TYRES HOLDING AIR PERFECTLY. ALL WHEELS COME WITH ORIGINAL CENTRE CAPS. NO CRACKS, CANNOT SEE ANY FLATSPOTS OT BUCKLES. CANNOT SEE ANY PREVIOUS WELDS. BOUGHT THESE TO USE AS A WINTER SET ON MY A3 BUT THEY ARE THE WRONG TYRE SIZE. WOULD CONSIDER A PART EX WITH A SET OF 18" A3/S3/S-LINE WHEELS - LET ME KNOW WHAT YOU HAVE. LOCATION, BIRMINGHAM. £295 ono .

Added a genuine S3 Lip Spoiler to the boot lid. I love it. Such a small, subtle mod but makes so much difference. Next will be rear window tints. Just to smoke them out a little.

Changed over from the winter wheels to the summer ones and decided I fancied an upgrade at the same time, managed to get my hands on a set of 2021 S-Line wheels which I love the look of. Makes the car look that little bit fresher and newer I think. I had black 17s on for winter, not a fan of black wheels usually but for winter they were sufficient. Comments welcome...

I think mine are standard LED.

I don't think they do....

AH, I see, to its just a cover. I guess they just use a universal bumper then.

I think I have a leaking washer fluid bottle. I can fill to around half way, then I start to get a leak. Has anybody replaced on and my question is, can I replace it without removing the bumper? I think one nut is at the front but I think I can get my ratchet onto it, just. I can get to most of it from under the arch liner, but before I go an buy one and then attack, just after some guidance. Thanks.

Hi guys, Looking at the below, I assume my car has headlight washers? How on earth do they work and what function do I use to activate them? Or, are these just a cover? Thanks.

Any recommendations for replacements? Want a standard factory look and finish

Hi all, Our A3 has got pitted/corroded looking tail pipes, what's the best way to spruce these up and give them back the chrome look and add some life back into them? Thanks.