Gareth Tully
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Gallery
Forums
Events
Articles
Videos
News & Articles
Premium Membership
Store
Posts posted by Gareth Tully
-
-
Hi Ed
I have just joined the club having just bought a 2013 A4 avant 2.0 tdi se technik 177hp auto. There’s 109k mileage.
Car is now six and a half years old. Five audi services but no timing belt or gearbox oil change.
What would your recommendations be for both?
Many thanks
-
Hi everyone. We have a problem with our beloved Audi A3 sport 1.6 litre Year April 2000
Periodically this car just won't start.
Its doesn't even turn over as if there is a flat battery.
No lights on dash board and it fails to start with jump leads. On two occasions mechanics have arrived at the house and took the car is away, but when it arrived at the garage it started first time.
It was left at the garage overnight and started successfully every time they tried it. On another occasion we called road side assistance and car started just as the assistance people arrived.
In the early weeks of lock down it was driven to the local shops and failed to start when we came back from the shop.
It sat there for a week and would not start, then suddenly it stared again.Has anyone had a similar problem and what was the solution?
Thanks
Yr 2000 A3 1.6 sport won’t start
in Audi Audio / DashCams / Electronics / Security
Posted
Hi Steve
yes it happens from a cold start. Each time it goes the computer shows nothing! Sometimes the car restarts when the mechanics arrive which is embarrassing.
But the electrics are failing
The indicators come on for no reason
The electric roof is no longer working
The central locking system also failed.
About 2 years ago I had to replace a battery then tried a number of starter motors.
But the flat dead noise when we attempt to start the car is not that grating noise more often associated with a failed starter motors :
Both fuel and air filters are replaced by an authorised VW dealership :
Thinking with the compression test don't know has that been looked at
Or voltage check under motor load operation!?