Jump to content


MAP

Members
  • Posts

    9
  • Joined

  • Last visited

Posts posted by MAP

  1. Hi looking to change my gear box oil on my A3 2008 1.9tdi manual 124k, is the standard manufactures oil ok to use or should I go for something better. Also what size are the fill and drain Allen key bolts. Finally I’m looking to add some fog lights will the wiring loom already be there and if so where should I start looking thanks for any help in sorting this 👍 

  2. Hi looking to change my gear box oil on my 2008 1.9tdi manual 124k, is the standard manufactures oil ok to use or should I go for something better. Also what size are the fill and drain Allen key bolts. Finally I’m looking to add some fog lights will the wiring loom already be there and if so where should I start looking thanks for any help in sorting this 👍 

  3. No problem advice was spot on I’m just probably to heavy handed, had to put connector into pillar and basically put the rubber boot into the hole and seal around that with waterproof tape to stop any water getting in, as obviously boot can’t seal any more as it has nothing to fix to. Thanks again for the help 👍

  4. 2 hours ago, DavidTdi said:

    Yes. See this thread of mine about six posts down it when I changed the whole door loom. The lack of logic as to how to lock that connector back in drove me mad for ages until I worked it out. Images help show what to do.

     

     

    Thanks for the reply that’s great advice it was driving me mad trying to work it out 👍

  5. Hi can someone tell me the best way to reattach the Wiring loom cover onto the door pillar, as I had to take it off to repair the wiring to the door speaker. The actual wiring loom connector itself just keeps going back into the pillar and I cannot see a way to secure it to the pillar, so the cover cannot attach  thanks for any help 👍 

    8B6816C1-A003-40DF-BBDE-D2D920884585.jpeg

×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support