ian mcc
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Gallery
Forums
Events
Articles
Videos
News & Articles
Premium Membership
Store
Posts posted by ian mcc
-
-
HI all,
I have purchased a second hand Kufatec sound booster which came off a Q7. All looks good with the kit but its not springing into life. I thought i had the right canbus wires, (one was orange/Black of the two wires) located in the right side of the boot, however nothing happens and unit is powered & earthed, engine running & in dynamic mode.
My issue i think is related to the CAN BUS drive wires and I am unsure on the exact colour of these wires on my car & also where to locate them.
can any one help or have some experience of fitting the Kufatec sound booster -
hi all
I have listed my plate A8HNW on eBay for £300. Its on retention and takes minutes to put onto the new car. All you require is your V5, get online with the retention certificate and it is done.
I will also post the 3x plates to save making them up (2x yellow rears)
where do i find the Drive canbus wires on A6 allroad 2015 3.0 for fitting Kufatec sound booster
in Audi A6 (C7) Forum
Posted
hi, found them
In the end I located the little buggers right at the back of the wiring loom in the boot. Orange/blk & orange/brown twisted wires.
So others know when fitting kufatec sound booster. The system does not work until you have One constant LED & One flashing at 1 sec intervals on the control box. Then you will need to connect the control box with your laptop using the Kufatec software which I downloaded. It confirms within the software that you are correctly connected, then its as simple as select model of car & BINGO!!
Sounds great!!!
I did have active sound on an old SQ5 i had as a company car, i fitted the kuratec sound box then to get the 6 different exhaust sounds and loved it. So glad to get that sound back and mask the diesel sound from this car.