Jump to content

Roger Brooklands

Members
  • Posts

    9
  • Joined

  • Last visited

Community Answers

  1. Roger Brooklands's post in Starting from ingition key stopped working was marked as the answer   
    All relays working,  not the ignition switch although the feed to one pole was intermittent  and resolved by tightening the securing nut.
    The Haynes manual suggested the cable so I explored the cable at the starter end.  It went into a bunch of cables and when the tie wraps were removed the cause was found.  For some reason the cable was folded into a loop and wedged under the bunch of thicker cable.  The movement during stating rubbed away the outer and then the copper leading to a 1 cm break.  As there was enough cable to splice and solder it back together it is now working properly.
    I now need to extinguish the air bar light as I switched the ignition on when the airbag had been removed.😂
×
×
  • Create New...

Forums


News


Membership