A4B7

I did without removing much at all really on a RHD car from the drivers footwell. Good luck with it.. I think I followed a write up from the net . It wasn't a bad job at all if it was I would have remembered.

It is the camshaft has worn through the buckets, had the same on mine about a year ago.

The rocker cover gasket can leak especially back near the tandem pump. Also those 115bhp 1.9tdi BRB amd bke engines are prone to cam wear .

Replace the heater matrix. It's easy enough , you can do it from the drivers footwell, no need to take the dash out or much really. If you're handy it is quite accessible.

Hi, I have an A4 B7 2008 and dip beams , park lights and number plate lights come on with ignition only , the rotary light switch does not turn on or off the lights. The lights on the switch bezel come on as selected. The car does not have auto lights. Main beams can only be activated by pulling back the dip/main beam stalk.. I got a known good OEM used replacement light switch but it did not fix the problem. If I disconnect the light switch from the car the lights go off. VCDS says implausible signal from E1 switch ( rotary switch for the lights) If I pull fuse 14 ( steering control unit) the lights go off. Internet searches show similar issues on other B6/B7s but I couldn't find any useful solutions. Anyone got any experience of my issue or a next logical step for trouble shooting this