Beany1

No vat they are a very good garage use them alot " viking motors " in rotherham they have 5 star on google thanks gareth

And i have a full luk dual mass flywheel and clutch kit 

They have not given me a quote yet i just booked it in 

Hi gareth i got my car booked in april 29th local garage clutch and dual mass flywheel im supplying parts they doing just labour car is audi a4 b7 2.0 tdi bre 140 manual i was thinking how much should i be looking at for labour and roughly how many hours is a job like this and i think they charge around 50 pound an hour thanks 

Hi having clutch and flywheel replaced how long labour time should it take thanks 

How long should i be looking at labour time for the fitting thanks 

Thank you gareth yes got whole new 3 piece luk clutch kit and dual mass flywheel luk too going in next month on 29th thanks 

Like this one 

Hi yes the clutch plate it has 4 springs on it are the suposed to have little movement in them ands its luk thanks

Hi are the springs in clutch disk suposed to have little movement 

Ye im getting vibration at idle and like slight rattling noise but drives good hope it sorts the problem out and thankyou very much jason 

Ye apreciate it and thanks for all your help and advice jason and with my torsion being that far out what symptoms will i be getting 

This is the only sticker i found on cam cover dont know if it means anything but i have found a remap tuning company that is gonna adjust the torsion value for me as they have all the diagnostic tool as i rang them and told them my torsion was at -3.6 he asked is it a pd engine it needs to at 0.0 or close to he booked me in for wednesday 50 pound to sort it out 

If i dont find sticker on cam cover with value range for my engine how do i go about setting torsion what should i set it at thanks 

My engine is a bre 2.0 tdi 

I checked it on vcds vagcom torsion showing -3.6 i have not touched the bolt or nothing yet and not looked for sticker on cam cover i will check in morning what should i look for on sticker 

Yes thank you jason exactly what im looking for when i get it to 0 how do i know its right and not out of range i heard when its at 0 and you rev the engine the number should move and if it stays at 0 and dont move its out of range thanks 

Hi no im talking about torsion value for camshaft on cambelt where you can adjust it by loosening the 3 bolts on cam i heard it supposed to be around 0 but mine is -3.6

Got audi a4 b7 2.0 tdi bre 140 my torsion is -3.6 whats it supposed to be on this engine thanks 

Got an audi a4 b7 2.0 tdi bre engine got vibration at idle checked on vcds my torsion value is -3.6 is it supposed to be close to 0 can anyone adjust this for me thanks

Got an audi a4 b7 2.0 tdi bre engine got vibration at idle checked on vcds my torsion value is -3.6 is it supposed to be close to 0 can anyone adjust this for me thanks 

Hi thanks stevey i put in reg no and it comes up with this mount but my y bracket is slightly different so im thinking i can swap out the rubber mount and use it on my original y bracket because the rubber looks the same