Mark200

Cliff Many thanks for the information, I will have a look to see if this can be disabled. It does not really cause any trouble; I was a bit worried when I first saw the error but I now know that the car will charge with no issue. The MyAudi app for the Q4 is not as good as the app for my previous car A3 8Y, at least I could lock the car if I was away from the vehicle not available in the Q4 version.

20 minutes after plugging in.

Hi, I own a Q4 45 bought in late April 25 and to date no real issues except one. I have a Hypervolt charger programmed to charge only at night, I plug up the car and everything is setup for the night charge. But I have noticed that after about 20 minutes, the MyAudi app reports that there is a charging issue and it has failed? I let the charger do its thing overnight and next morning everything is OK, battery charged to 80% and My Audi app reporting correctly. Has anyone else experienced this or Is this a known issue with the MyAudi app? Apart from this really enjoying the car.

Hi, Not sure if this is a permanent issue, I can log into my Audi account (UK) setting with no problem. If I try and log into my Audi and choose a different country setting then the screen just continuously refreshes and you get no further than that. I wonder if Audi have put a block on this? Was hoping to purchase Traffic Sign Recognition from the Polish site as this is about 1/3 of the cost of the UK site.

Gents Thank you for your replies - not sure how to check the 48v battery voltage as it is all very well hidden and screwed down. Also cannot find an option to read Voltage /Capacity on the OBDeleven device - There is a selection for the mhev system (Battery Energy Module (21)), mainly software levels / serial numbers etc. 1st major service is due in April, I will report it to them and see what they say (Still under warranty 🙂 ) Cheers

2021 A3 Edition 1 (35 TFSI) If I have not used my car for say 3 days, when I go to start the car an error is reported that the 48v system is low but will recharge whilst driving. I have seen this many times with no impact on the car. Recently I had left my car for 2 weeks and when I came to start the car the same error was reported along with many others ( 48v charge system fail, Brake boost problem, Evap problem, Dealer Service Required and many more.) Surprisingly after driving for 5 minutes all of these errors disappeared, I used an OBDeleven device to see what faults had been recorded but none were present. Anyone else had any issues like this?

Hi Pronto, When I refitted the spare wheel components for my A3 I found that things like the jack / centre wheel bolt for spare tyre are interchangeable between the models. I was lucky enough to purchase jack/ full tool kit and centre bolt from eBay from one seller, then the actual space saver tyre from another. Picture below is how my A3 spare tyre in the boot looks.

Hi, I don't log in or have an account. Try clicking the Car Prog2 link in the left hand panel. Sometimes the program does prompt me to sign in, I just make it reload and try again. I have looked on the site to register but cannot find the link. When you do get this working look at section 0, page 011-100. I think this will list out the items you require. Let me know if you cannot gain access, I will do a copy and paste for you. Mark

Hi, many thanks for the photos this has helped me sort this out. Hope that you get all the parts you need. Mark

Hi, I use an on line service https://ifinterface.com/prcog/car/cp2/inprog.php. click on safe zone then carprog2. Adjust search patten for Audi /model/year. I have already added a space saver to mine as well as jack/handle/toolkit. You can also check out the prices of these items within the ifinterface program, I have found that you need to multiple the advertised price by x1.5. To account for euro to pound and vat etc. Hope this helps. Mark

Hi I own a 2021 A3 Edition 1 saloon and I am quite pleased with the car and all of its features. Looking underneath the car the other day I noticed that one of the protection panels are missing and it looks like it was never fitted. Speaking with the local Audi dealer they were not too sure if this should of been fitted or not. They confirmed that in their parts list this had been "Greyed" out which suggest not fitted on UK cars (8Y5 825 217A). Could another A3 8Y owner have a look and confirm if it has been fitted or not to their vehicle. I enclose a photo of the underneath of my car (Viewed from the rear quarter LHS) showing the missing panel along with a picture from the web showing all panels fitted on LHD models also ETKA image and codes. Many Thanks in advance for your help.