Jump to content


Ektoras

Members
  • Posts

    4
  • Joined

  • Last visited

Posts posted by Ektoras

  1. On 3/16/2023 at 2:13 PM, Guest said:

    I think it will they told me it was not compatible with mine but I got the vin and reg from one on the forecourt that had it fitted from new gave them that number and it was no problem they never noticed it was their own car

    i think if something was not fitted when built Audi say it’s not compatible 

    I have done the use another Vin and reg from a vehicle that has the part fitted

    my S1 I got front parking sensors and power fold mirrors from an A1 Sline in the showroom they told me parking sensors did not fit S1 they did

    I got rear camera from Q7 again I got the one with the wash Audi said it fit not fit it did they are all same camera mine did not come with one they told me not compatible 

    I have a photo of the original boot liner with the dimensions if yours is the same as this then yes it will fit

    it is 150mm at the deepest part which is the base of photo

    1 meter widest point

    940 mm where the trays start near top 

    narrowest point at the top of three trays 910 mm

    top to bottom on photo 840 mm

    i have put post it notes showing measurements 

    there are 2 nuts in the speaker fitting well the new one fits in loose and does not need nuts as they wheel is in the way of fastening it you will see there is no provision that’s normal 

    obviously the speaker and tools are in the new one

    it only weighs about 25 grams really light made from expanded foam

     

    let me know if yours has the same dimensions will be useful for any one else

    Check in the door pillar just below stricken plate where the tyre pressures are located it shows the wheel sizes for your car and also the spare wheel size is on there too even though it came with out I will put the photo of mine on shows Spare as T 145/85 R18 and pressure of 4.2 bar 60 psi

    make sure you do get the correct size wheel as a wrong size one could invalidate insurance I have Audi Inure and one of the questions is are you using the correct size wheels and tyres Yes box ticked

    if the spare was not compatible this info would NOT be on the door pillar 

     

    IMG_5786.jpeg

    IMG_2566.png

    Here is a picture of mine with the dimentions. I am guessing it is indeed same, as the half centimetre difference is probably because i measured it inside the boot. 

    So i think I am gonna order it.

    By the way: it seems that screws that are holding it in place (second picture) are 'audi-special' haven't seen them before. Any idea where i can find a screwdriver for these?

    Thanks for the tip on the spare wheel size, mine is also 145/85 R18. 

     

    2023-03-19_19-59-03.jpg

    IMG_4820.jpg

  2. 1 hour ago, ivor bigun said:

    I think it will they told me it was not compatible with mine but I got the vin and reg from one on the forecourt that had it fitted from new gave them that number and it was no problem they never noticed it was their own car

    i think if something was not fitted when built Audi say it’s not compatible 

    I have done the use another Vin and reg from a vehicle that has the part fitted

    my S1 I got front parking sensors and power fold mirrors from an A1 Sline in the showroom they told me parking sensors did not fit S1 they did

    I got rear camera from Q7 again I got the one with the wash Audi said it fit not fit it did they are all same camera mine did not come with one they told me not compatible 

    I have a photo of the original boot liner with the dimensions if yours is the same as this then yes it will fit

    it is 150mm at the deepest part which is the base of photo

    1 meter widest point

    940 mm where the trays start near top 

    narrowest point at the top of three trays 910 mm

    top to bottom on photo 840 mm

    i have put post it notes showing measurements 

    there are 2 nuts in the speaker fitting well the new one fits in loose and does not need nuts as they wheel is in the way of fastening it you will see there is no provision that’s normal 

    obviously the speaker and tools are in the new one

    it only weighs about 25 grams really light made from expanded foam

     

    let me know if yours has the same dimensions will be useful for any one else

    Check in the door pillar just below stricken plate where the tyre pressures are located it shows the wheel sizes for your car and also the spare wheel size is on there too even though it came with out I will put the photo of mine on shows Spare as T 145/85 R18 and pressure of 4.2 bar 60 psi

    make sure you do get the correct size wheel as a wrong size one could invalidate insurance I have Audi Inure and one of the questions is are you using the correct size wheels and tyres Yes box ticked

    if the spare was not compatible this info would NOT be on the door pillar 

     

    IMG_5786.jpeg

    IMG_2566.png

    Many thanks Ivor, super helpful! I'll check my dimentions and let you guys know. 

    By the way, amazing colour!!

     

  3. hello all,

    Does anyone knows is this spare wheel compartment (83A-012-109-H) can be fitted in the 2020 Q3? 

    I have called an audi dealer today and he said that this part is not compatible with my car.

    But reading through this thread, I have  the feeling that it is..

     

×
×
  • Create New...

Forums


News


Membership