hafizur

Tested the connector, getting 2volts when cranking Also getting fuel coming out of the hose on the bottom I am assuming its either that pump or injectors further down the line

Hi usually the assumption is that some kind of marking is on the plate can you post a photo of the front and back?

Hi everyone Car: Audi A3 8P 2009 2.0T FSI Sportback Quattro Car cranks by won't start, it seems its lacking fuel or something along them lines VCDS scan shows the following 001089 - EVAP Emission Control Sys P0441 - 000 - Incorrect Flow - Intermittent - MIL ON 008854 - Fuel Pressure Regulator Valve (N276) P2296 - 000 - Short to Plus - Intermittent I checked the voltage on the connector for the sensor ( i think its the correct sensor, see photo), it is showing as 1.2v with ignition on first turn Unable to check what voltage I get when trying to start Have a new EVAP valve ready to collect but don't think that is causing the issue of not starting as it started for a while with the EVAP issue Any advice would be appreciated