Jump to content


Dave Tuck

Members
  • Posts

    4
  • Joined

  • Last visited

Profile Information

  • First Name
    Dave
  • Location
    Northumberland
  • Audi Model
    Audi 80GT
  • Audi Year
    1975

Dave Tuck's Achievements

Newbie

Newbie (1/14)

  • Week One Done
  • First Post
  • Conversation Starter

Recent Badges

2

Reputation

  1. I don't want any money for this but I think postage will be just under £8. Cheers, Dave.
  2. Would £150 for the five wheels be reasonable, with the buyer arranging transport?
  3. Replacement Cover for Audi Coupe Driver’s Seat Cushion Side Bolster The outer bolster of the driver’s seat cushion on my Y-reg Audi Coupe wore badly and I ordered a new covering from the dealer. Unfortunately, shortly afterwards, the car was involved in an accident and written off so this was never fitted. If you have a Coupe with worn seat bolster you may wish to acquire this unused item. item.
  4. I have a set of five original alloy wheels from my 1974 Audi 80GT and wondered whether anyone would like to acquire these for a restoration project. You can see a car identical in all respects to the one I had, including the wheels, in the following link: https://www.influx.co.uk/cars/audi-80-gt/ The wheels were stripped for refinishing as I intended to buy a Mk 1 Golf GTi and use them on that. This didn't happen and they have since been stored in my garage for almost 40 years so they will need to be cleaned up and re-painted. They have never been kerbed but two of them have two small marks on the front face, caused by the clamp used during tyre removal, which should be easily dealt with during re-finishing. Specification is 5Jx13 H2, offset ET 45, centre bore 57.1mm and wheel bolt holes are 4x100mm PCD. They were originally fitted with 175/70HR13 tyres but can be fitted with narrower 155/80R13 tyres for winter use if required.
×
×
  • Create New...

Forums


News


Membership