Jump to content


califford

Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by califford

  1. 2 minutes ago, jasonj said:

    Hi Vilius , Have all the codes disappeared ?  If so it tells me ECU is ok as it recognises the removal of the code .

    The way it works is the  Instrument Control Module  Locks the Codes into its Memory . If this has now been cleared .

    Current Status 

    1: Have all the codes gone Now  ?

    2: Does the Car Start without any problems ?

    2A: Is there any warning lights on the Instrument Cluster ? Jasonj

     

    1. Yes

    2. Yes

    3. No

     

    after some time its gonna happen again. Now the fault codes are cleared its going to be ok i think.

    • Like 1
  2. 4 minutes ago, jasonj said:

    Hi Vilius , You have to then Clear the Fault Code on OBD reader .  The Parking Brake Malfunction Code has to be Cleared,   could be ? ( 00526 or 17087  )

    this code has to be cleared .

    So 

    1: Do the switch Ignition OFF for 5 seconds then switch ON again . with OBD Reader plugged in . And Then Clear all the codes . Unplug OBD . Start car and then see if any codes are showing . By doing another Reading with OBD. Jasonj

    after clearing all codes ( there was only one 0003 ), it shows nothing now. Im starting to think about ECU, ECM. Because there was water in this sector when water channels was clogged. I will try to remove it and inspect it, and update it here. 

    • Like 1
  3. 8 minutes ago, jasonj said:

    Hi Vilius I lifted this from google Jasonj  

    1: Have you reset the Service  Interval Reminder , recently ? Jasonj

     

    How do I fix 00003 fault code?
     
     
    00003 - Control Module: Defective

    To clear this Fault Code, please perform/repeat the following Steps 3 (THREE) times: Switch the Ignition OFF for 5 Seconds, then Switch it ON again. Clear Fault Codes in Brake Electronics Control Module, then exit out of the Control Module.
     

    Switch the Ignition OFF for 5 Seconds, then Switch it ON againthis is the only thing to make a reset?

    • Like 1
  4. 57 minutes ago, jasonj said:

    Hi Vilius,

    1: Do you have any Fault Codes ?

    2: Have you had the Car Battery Tested . 

    3: What is the engine specification eg ( Audi A6 2.4. Petrol  ) ?

    4: Is the Key Fob Battery good .. 

    4a: Does the Key Fob open the Car as it should ? 

    4b : Do you have another Key for this Car ? 

    5: Has this Car had any Water in the Footwell . or been through Water ? 

    6: Have you had any heavy objects or people standing on the Back Seats . ?

    6a: Have you had any Water spilt in the middle of the Back Seat?  Jasonj 

    1. 0003 Control module defective

    2. Car battery is good

    3. Yes, petrol

    4., 4a. Not new, i think i should change it, but unlocks car good

    4b. I have 2 keys for this car, but same ones

    5. Yes, the water channels under the hood were clogged.

    6, 6a. No

     

  5. hi i have these weird problems when I try to turn on the ignition, only the mmi turns on and the steering wheel unlocks, the car won't start and nothing lights up on the dashboard ( but after few or more key turns dashboard lights turns on and car works as it was )
    other problem happens that when I drive it throws a parking brake malfunction and sometimes it shuts off because of that
    other problem happens that when I start the car, it shuts off immediately or it shuts off while standing still. Do you have any advice for me?

     

    car is audi a6 c6 2004 2.4 automatic

    20240305_140249.jpg

×
×
  • Create New...

Forums


News


Membership