poolielad

Thanks mate, will give it a try and let you know.

What switch is this, and where about is it please??

Hi guys, I have a 2010 Audi A3 S-line........ I have a Airbag light which wont go away, any ideas please?? I have just changed the Heater blower motor so I guess one of the connections to the glove box which I had to remove was for the airbag, but all put back together now and its still there!!

Update: I ended up needing a new heater blower motor for this, thanks for the help guys..

Hi guys, air blower not working on my 2010 SLine TDE. The lights come on, but no and the dial goes up and down when adjusting it, but blower not kicking in, took blower out and it spins freely, guy at scrap yard checked it and said blower motor is fine, ordered a new resister and fitted it, but still the same, ( I suspect the new resister is faulty). How can i test the resister to see if its working or not? And if resister is ok what else could be the problem?? I have check fuse and thats ok. Thanks

Right guys....... i put a 7.5 am fuse in No 1 in box under bonnet ( the box I messed about with Expensive lesson, although when the auto electrician check the cluster before I sent it off he said it was dead....... Thanks to everyone for their input and help... I am sure I will be back onwith more questions soon...

Here are the pics of my fuses, could someone please tell me if anything looks amiss with them ??

So I have had the cluster sent to cartonix, they said it was fired up on their bench, sent it back to me, put it in and still dead!!!Someone did say to me that I will end up sending it backa nd forth to them to get it sorted!!! As anyone had this done and had to send it back and forth to get it right??

Thank you for the reply, much appreciated.

Bit long winded, sorry. I was checking out the fuses under the bonnet, I took a few out to check... Then disaster!!!!! I got in car, tried to fire it up, no dash lights at all, started engine, it cut out after a couple of seconds, then tried to fire up again on its own. Radio now not working also!!! Got the RAC out, he says it the instrument cluster (report from RAC below) and needs to be sent off for repair. Has anyone had this issue before?? All I did was pull fuses and put them back in (all fuses looked fine). And can someone please tell me how much it would cost and how or who fixes these things. RAC REPORT: non start. instrument cluster inop. racscan found various communication fault codes stored. checked fuses and relays, all ok. removed instrument cluster to check connections, all ok. suspect possible internal fault with instrument cluster, requires further diag at garage. Any help would really be appreciated.

Well I managed to get the bottle off with having to take the bumper fully off, I just undid one side of bumper and managed to get my hands in to get to the screws, It was still a bit of a bugger, but could of been worse.

Thanks for the reply Gareth. I can see and feel the bottle (and the big crack in it lol). But I have no idea how to change it!

Hi, I have a Audi A3 S Line TDI 2011.... Does anyone please have a link to a video showing how to change the wiper bottle? Mine is cracked and wont hold water. Thank you in advance.