Jump to content


riflo

Members
  • Posts

    4
  • Joined

  • Last visited

Profile Information

  • First Name
    Flori
  • Town / County
    Turin
  • Audi Model
    A6 3.0 BITDI 320ps
  • Audi Year
    2016

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

riflo's Achievements

  1. Hello Steve, thanks for the link. I remember coming across this before and even spent about a week trying to find it again, but I couldn’t find it. Really appreciate it. Is this something I can diagnose with computer maybe before removing EGR?
  2. Hello, this is the part number for rear left tail light: 4G9945095B
  3. What is the vin number?
  4. Hello guys, hope you are enjoying the life a bit 😄... First time posting here I have an Audi A6 Competition 2016 3.0 BITDI (326hp). I have more than a year tracing an issue. I’ve been having a strange issue with my car during colder weather (around 4°C to 18°C) and was wondering if anyone else has experienced something similar. On a cold start, the engine fires up just fine. The idle RPM is slightly higher than normal(see the image attached higher_cold_rpm.jpg and normal_cold_idle.jpg). However, if I press and hold the throttle to bring the RPM up to around 1200–1400, the engine starts shaking and the RPM fluctuates up and down.(see the video issue.mov) If I try to do the same thing, it is gone and everything is normal except the high idle RPM which is 900 RPM and after 2-3 minutes it drop to 820-850 and after 5-8 minutes it drop to 800. Also a unpleasant smell comes out from a car's exhaust(maybe wrong air/fuel mixture) On warmer weather I don’t have this issue at all. The idle is still slightly high(the same as on colder weather) on cold start, but there's no shaking or RPM fluctuations when I press the throttle. From the past, the normal engine RPM after a cold start should be a bit higher than 800 RPM(maybe 820-850). Now the idle RPM is 900 RPM and after 3-4 minutes it drop to 820-850 and after 5-8 minutes it drop to 800. So far I’ve checked: No error codes stored (I scanned with a diagnostic tool – nothing came up) Injectors tested and all are within the spec Throttle body cleaned (minor carbon buildup, nothing major – cleaned the whole area shown in the image engine.png except the EGR Valve) What do you think I need to do next of if anyone else has experienced something similar what did you fixed? Thank you guys Flori issue.mov
×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support