Tony322

I’ll have a look at what u mentioned appreciate it

I did a trick putting drops of oil in spark plug holes and reconnecting spark plugs and coils and I noticed compression being built like it was wanting to turn over on the second attempt of cranking same thing

Friend checked it on his car all readings for his car are consistent

Checked compression tester and it works

Thanks

Removed all, I haven’t checked new compression tester.

I connected a 14mm adaptor onto nozzle and attached the gauge removed spark plugs and screwed in nozzle to the spark plug hole and cranked the car the readings were at zero (a slight flicker on the needle attempting to go up) I did this on all the cylinders with the same readings. I bought a new compression tester

Haha cliff mate don’t give up on me

With the compression tester

Yes I’ve taken the cover off just now nothing seems to be broken and there’s no slack on the chain

Using a compression tester readings are showing 0 on all cylinders, air I can feel coming out of the spark plug hole when taken off the compression test and by cranking the car

Yes no compression although I can feel air coming out, engine spins faster than normal. I haven’t checked the chain

There’s no compression on all 4 cylinders? Help 🤯

Spins normal but doesn’t catch on makes a popping sound I’m baffled

Appreciate it will get this and see how it goes

Diagnostics check showing no codes, leading up to the car not starting parked up one day next day will not start, I did suspect starter motor but does sound like low compression when cranking the engine

New battery coils and spark plugs fuel pump is working all fuses are working what can be the issue