ryanp90

Thanks phantom. So mine actually turned out to be a hidden after market immobiliser, however. Since removing I still have no ignition. And randomly component protection on bcm1 and 2 so the issue may be similar to yours. Did the guy use odis to code?

I have actually tested pyro for continuity and it has it. I'm currently in the process of digging out my old vcds to scan, hopefully this may help further. I also have a spare bcm1 incase this could resolve. When I removed.bcm2 I lose everything. When I disconnect bcm1 every stays as it is, so as kind of a process of discrimination I bought one to rule it out ... Or.ideally fix

Hi guys! I'm hopeful someone here can shed some light for me. I'm getting desperate and running out of ideas. Any help appreciated with strange no ignition issue. I have a 2019 sq5 3.0 TFSI. Purchased from salvage, after Jump start I cannot get any ignition in the car. I can only scan from module 9, steering column module has no 12v. Tailgate working ✅ Hazard lights working ✅ Electric seats working ✅ Lights front and rear working ✅ Door puddle lights working ✅ Buzz noise when start stop pressed or door open ✅ The P in the shifter lights up ✅ But absolutely nothing else No digital dash, no mmi, no ignition, no windows, handbrake can go on, but not off. Any guidance would be great. Replaced steering authorisation module, no change So far checked fuses and relays, checked modules for water ingress. Checked fuses box in rear, UK passenger footwell, UK passenger dash, and the little relay box middle of engine bay scuttle panel. Really struggling with what else it could be Thanks in advance. Ryan