Bipman

Cool, thanks!

OK, thanks. I thought as much. Any idea of the best to get such an item? I took a look and there seemed to be several types for my model and year. SPG

Maybe. Weekends are too busy at the moment but I'll take a look and see if it looks relatively easy. The main issue will be removing the wiper arms if they are locked or need a puller.

I took a look on ElsaWin and it looks like you only have to remove the windscreen wiper arms and then a few bolts. I believe the wiper arms are a bit of a pig to remove though. Bipman

Hi I've scanned the codes and get the following for the Aircon Address 08: Auto HVAC Labels: 4F0-910-043.lbl Part No SW: 4F0 910 043 A HW: 4F2 820 043 Q Component: KLIMABETAETIGUNGH30 0020 Revision: 00000052 Serial number: 00000000471089 Coding: 0001302 Shop #: WSC 02325 758 00200 VCID: 1C304C5FDFB860DEA1-8048 1 Fault Found: 01274 - Air Flow Flap Positioning Motor (V71) 003 - Mechanical Failure - Intermittent Freeze Frame: Fault Status: 00100011 Fault Priority: 3 Fault Frequency: 254 Reset counter: 115 Mileage: 131582 km Time Indication: 0 Date: 2015.05.01 Time: 20:54:43 Freeze Frame: Voltage: 13.10 V Temperature: 22.0°C (no units): 160.0 (no units): 165.0 Temperature: 9.0°C Is this motor east to get to ? Bipman

I'm not sure; do you mean in Eco mode ? Bipman

Hi all I think my aircon re-circulation actuator is a bit stuck as the aircon only seems to work properly in re-circulation mode. Is this actuator easy to reach or would it need a garage to check it ? It's a 2008 2.7TDi model. Bipman