Bipman

Cool, thanks!

OK, thanks.  I thought as much.  Any idea of the best to get such an item?  I took a look and there seemed to be several types for my model and year.

SPG

Maybe.  Weekends are too busy at the moment but I'll take a look and see if it looks relatively easy.  The main issue will be removing the wiper arms if they are locked or need a puller.

I took a look on ElsaWin and it looks like you only have to remove the windscreen wiper arms and then a few bolts.  I believe the wiper arms are a bit of a pig to remove though. 

Bipman

Hi

I've scanned the codes and get the following for the Aircon

Address 08: Auto HVAC        Labels: 4F0-910-043.lbl
   Part No SW: 4F0 910 043 A    HW: 4F2 820 043 Q
   Component: KLIMABETAETIGUNGH30 0020  
   Revision: 00000052    Serial number: 00000000471089
   Coding: 0001302
   Shop #: WSC 02325 758 00200
   VCID: 1C304C5FDFB860DEA1-8048

1 Fault Found:
01274 - Air Flow Flap Positioning Motor (V71)
            003 - Mechanical Failure - Intermittent
             Freeze Frame:
                    Fault Status: 00100011
                    Fault Priority: 3
                    Fault Frequency: 254
                    Reset counter: 115
                    Mileage: 131582 km
                    Time Indication: 0
                    Date: 2015.05.01
                    Time: 20:54:43

             Freeze Frame:
                    Voltage: 13.10 V
                    Temperature: 22.0°C
                    (no units): 160.0
                    (no units): 165.0
                    Temperature: 9.0°C

Is this motor east to get to ?

Bipman

I'm not sure; do you mean in Eco mode ?

Bipman

Hi all

I think my aircon re-circulation actuator is a bit stuck as the aircon only seems to work properly in re-circulation mode.  Is this actuator easy to reach or would it need a garage to check it ?  It's a 2008 2.7TDi model.

Bipman