DaveS

Hi guys So I have a fault code I am hoping you lovely people can help me with. The fault code is 007150 Please check DTC memory of steering wheel electronics | implausible data of steering wheel angle sensor module (G85) After doing some good old Googling I am coming up empty. The closest I could find was http://wiki.ross-tech.com/wiki/index.php/00778 but after navigating to the possible solutions page http://wiki.ross-tech.com/wiki/index.php/Audi_A3/S3_(8V/FF) I come up empty again as there doesn't seem to be any solutions provided for the code I am getting. I have a 2014 Audi A3, and honestly it drives fine, maybe at around 70ish MPH the wheel vibrates very slightly, but I put this down to the terrible UK road conditions. I would like to get some clarity on this fault code, and if its something I should be worried about. I have tried clearing the code, but it just comes back, and I have tried turning the wheel from full lock to full lock a couple of times to see if that helps, but still no joy. I also get this code 017158 Databus received error messages, but I am guessing if I can permanently clear/fix the 007150 fault, this fault code will also clear. Any help would be greatly appreciated. Thanks Dave

Hello all, I am looking to replace both the front and rear brake pads and disks on my 2014 A3 S-Line Sport back. I have the 1.4 TFSI with S-Tronic, which I believe has 150ps (correct me if I'm wrong) The car never gets tracked, but I am looking to re-map it in the future with the Revo remap. So with that in mind and brakes, inline with tyres (just replaced all four for Michelin Pilot Sport 4, loving them so far, but if the Golf GTI mark 5 forum is anything to go by, don't start a tyre thread ha ha) being the 1st line in safety I am looking for recommendations. I'm not looking to upgrade the brakes to the S3 type or anything like that, just looking for a good solid disc and pad that can handle the remap and an exuberant driving style (when the Mrs isn't in the car) Thanks in advance guys.

Hello everyone I have a 2014 Audi A3 S Line with the 1.4 (cylinder on demand 150ps) engine and I am looking have it stage 1 remapped by Revo and then to service it myself soon. I was hoping someone could firstly suggest a good spark plug that the Revo map would benefit from, and also what torque I need for things like the spark plugs, the oil filter and the oil drainage plug? Or where I could find these specifications? Sorry for my incompetence, and thanks in advance.