WolfLucifer

Thank you for a reply, i was thinking about ground as well since its like on and off situation, waiting for better weather to open up the wires and look whats going on there, btw which wire is the ground there? when i installed it i remember there were off colored wires which confused me at first and this was 5 years ago so my memory is gone now on the colors 😄

Hello all, I have a problem with my right reversing light. About a month or so ago i started getting a dash error that my right side reversing light bulb is out, I checked the bulb and its good, i do have an aftermarket reversing camera and parking sensors connected to that as well. Everyting was working fine for the past couple of years now and i have not changed anything so this error is kinda a mystery. (during that month i had one incident where the error did not appear but the next day it came back). I dont mind having the error pop up since there are modifications (parking sensors and rvc installed) which might cause the error to pop up, but the problem is the car shuts down power to the camera and parking sensors a few seconds after they are turned on (they do get power during that time and function properly) and i need those working. I do have a VCDS, maybe there is a coding i can do so that the error does not appear and the power is not shut off so i can use the camera?

Update on this, ended up changing 3 fuel injectors. The shaking is still there on cold start but goes away in 30'ish seconds or less. But now no more smoke is coming out of the exhaust so at least that's good for now. Next up I guess is spark plugs that could be causing the shake on cold start?

Thank you for the fast response. Wouldn't the vibrations be apparent while driving as well if it was the mount? My main guess right now is spark plugs/coil pack?(not sure if diesel has those)? Can I test MAF sensor with the Carly adapter?

Hello everyone, Search the internet wide but couldn't find my exact problem. I have 2008 AUDI A3 Sportback 125kW. Couple of months back my fuel injectors failed and were replaced with refurbished ones. Now from time to time on idle the engine shakes a lot, I do hear some sort of knocking noise when it happens but I am not sure if its a misfire or not. ECU doesnt give any error codes what so ever so i am baffled. The shake usually stops after couple of minutes. Now its -10-14C and the shakes starts after driving a little bit then dissapears as engine warms up. I am thinking it could be spark plugs but then ECU should give an error, fuel injectors should give an error as well. How can i diagnose this? I have Carly OBD thingy for diagnostics so maybe i can look into something with it to identify what is wrong?