Cian L

Getting fault codes up on Audi a4 B9 P13D600 & P13D400 sensor for internal pressure of cylinder 3 - implausible signal and sensor for internal pressure of cylinder 3 - electrical error. These are the faults . These faults only came after I changed glow plug 3 the pressurised glow plug . After the fault clears will come up again after about 48 hours . It’s not struggling in cold starts or anything starting perfect and everything seems perfect . I gave the wiring harness a quick look wiring looks okay and also tried to reset cylinder values on obd11 basic settings but it keeps loading and won’t actually reset . Never had any fault codes before this pressurised glow plug was replaced with a Bosch one . Anyone have any idea of what it could be?

Yes got quoted 2000 from main dealer has to be calibrated ect after been fitted

Getting an intermittent fault up on my Audi a4 B9 - B11CE15 - short circuit in the camera heater for front windscreen , I was wondering if this can be coded out as it comes up every 5 minutes if anyone has done this before could help me out it would be great

Got these already nothing showing up really

Everytime I start up my car I get this pre sense fault on the car it will go away after about 5 seconds like normal then after about a minute or 2 of driving the fault will come up again and will constantly come up in 5 minute intervals with a binging noise . It seems to only happen in winter in the cold evening or mornings but once I blast the heat and car heats up after about 20 mins the fault will go away it self . Anyone have any idea of what it could be ?