Everything posted by Kapil Mistry
-
SQ5 Holding Revs When Accelarating In 1st and 2nd
The company coming to me is actually a remap company, I remapped the car when i bought it. A few weeks back they did a rollback on the gearbox software which helps but didnt fully resolve the issue. They are coming back to perform a further rollback which "should" resolve the issue completely. Will keep you posted.
-
SQ5 Holding Revs When Accelarating In 1st and 2nd
Hi Cabiali, I heard something very similar from another mechanic. I have been trying to piece the timeline together and i believe the issue for me only surfaced after it went into the dealer (March-June 2017), so it is possible an update was applied while it was there....very hard to pin point. I have someone coming to see my car on Friday with the foresight of trying to downgrade the software versions. I'll let you know how it goes. Best, Kapil
-
SQ5 Holding Revs When Accelarating In 1st and 2nd
Hi, Unfortunately the issue still persists, i havent got to the bottom of it. As of May the car is now out of Audi warranty which is very frustrating. Are you experiencing a similar issue? Best, Kapil
-
SQ5 Remap
Hi Lee, I haven't put it on a rolling road so cant exactly verify it however its meant to be 405 BHP & 555 ft-lb torque. How about yours? Kapil
-
SQ5 Holding Revs When Accelarating In 1st and 2nd
Morning Steve, Thanks for your reply. Audi has not changed the gearbox as according to them the 8 speed gearbox in the SQ5 is fully automatic and as such doesn't require maintenance. Issue 1: Snappy Gear Changes The issue of snappy (unsmooth) gear changes both on up and down shift is completely intermittent. Everytime the car has gone to Audi they have performed a "reset" on the gearbox so that it readapts. During the re-adaptation period (which i class as 100 miles or so) the car drives almost perfectly however after this the old characteristics seem to reappear. Issue 2: Revs Holding In 1st/2nd Gear The issue of the revs holding in 1st/2nd gear is a new development however this is continuous. Anything more than a light touch of acceleration and you'll notice the revs holding. Strangely, get the car above 3rd/4th gear and the issue disappears even at low revs. My knowledge on these cars is very limited however do we know if the 8 speed gearbox is double clutched? Perhaps an issue with the primary clutch, just thinking out loud here. I took an Audi technician out in the car, he drove it and noticed the revs issue, they kept the car for almost a week and said they couldn't replicate the issue! Thanks, Kapil
-
SQ5 Remap
Hi Steve, I have used http://www.dmsautomotive.com/ many times, would highly recommend these guys. Hope this helps. Kapil
-
SQ5 Holding Revs When Accelarating In 1st and 2nd
Hi, I'm having a little issue with my SQ5 which i am hoping someone can shed some light on. For the past 2-3 months I have noticed the car doing something very weird whenever I accelerate (anything more than a gentle touch) from standstill. At points during 1st and 2nd the revs seem to hold somewhere between 1-2k rpm and then drop before continuing to move through the revs as normal. During this "hold" it is still accelerating however can be a little jerky when the revs drop. The car has been in and out of Audi 3-4 times for gearbox issues (I complained about gear changes not being smooth) which they were neither able to replicate or resolve. I do know that during the various visits the car it has had software updates applied to both ecu and gearbox. I maybe way off but i'm thinking one these updates could have caused this issue, or it is something else. Anyone else had a similar issue? Thanks, Kapil
-
SQ5 Remap
Hi, In the end I went with DMS http://www.dmsautomotive.com/ who I have used on my past 2 cars. Thanks for all your advice. Kapil
-
SQ5 Remap
Sorry, i should have been more specific. I am referring to an ECU remap / tune up, to increase bhp. Thanks, Kapil
-
SQ5 Remap
Hi everyone, I am new both to this forum and Audi. I recently purchased a 2015 SQ5 and wanted to know if anyone had any recommendations for remapping suppliers. On my previous two cars (non Audi) I used DMS Automotive which i was happy with however they are a little on the pricey side. Any suggestions? Many thanks, Kapil