Jump to content


2x A6 Allroads


cpjvej2016
 Share

Recommended Posts

Hi all,

2x Audi A6 Allroads, one is X plate (2000) and one is 2003. The 2003 has a fair bit of rust underneath and the lift suspension isnt working. bought the second A6 allroad (2000) in the hopes I could 'Rip bits off' to make the 2003 plate happy again. However, the 2000 plate is in too good a condition to rip bits off of. The 2k plate seems to not have the heated seats that the 2003 has, and the buttons on the steering wheel on the 2000 dont work for some reason. 

is the wiring loom the same on the 2000 as the 2003, so Could I add the heated seats from the 03 into the 2000 and plug them in ? 

 

Any Advice ?

Link to comment
Share on other sites


I would check to see if the older one has the plugs already there for heated seats. If so then it should be fairly straight forward I would think. Other than that, you may need to swap the whole wiring loom over.

Link to comment
Share on other sites

On 5/6/2016 at 1:04 PM, cpjvej2016 said:

Thanks Ill take a look at the weekend!

Cool, let us know how you get on :biggrin:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership