phebas

An update to my original post. I replaced the drivers mirror control unit (located in the arm rest, part no 8K0959565C). This did not resolve the problem, still cannot move either mirror. The switch is getting power since I checked the 4-pin connector to the switch (12v on two of the four wires going to the switch). Checked the continuity of the cable back to the big module beside the bass speaker -ok there. I'm still getting the follow code via my scanner "01705 Selection Switch for Mirror- Adjust (E48) -sporadic 008-Implausible Signal" after replacing the switch. Any suggestions as to what's going on?

The control on the driver's door arm rest for setting the angle of both mirrors has suddenly stopped working. Cannot move either the left or right mirror. Sudden failure on both mirrors suggests a fuse problem. Does anyone know where the fuse(s) for this function is located?

My 2009 Q5 has a similar problem. I have an intermittent problem selecting a media sourcein the MMI I.e. at present I get a perpetual 'loading' message for all media sources, jukebox, CD, SD cards. This started with the jukebox access and lasted a few days after which the jukebox HD was accessible again. The most recent form of the problem affects all sources. I can see the contents in each case but cannot load/play any track. Radio and navigation are ok. Anyone have any advice?

Hi, I have a 2009 Q5 with a B&O MMI system. According to the manual I can import the contents of a CD to my Jukebox which I assume is a 10GB memory card. However, I'm unable to do this, I have followed the instructions (including keeping the engine running during transfer! (p13)) but the system simply plays the CD. There is no 'Select All files/folders" option for the CD source. I can transfer from a memory card to the Jukebox without problems. Is there some form of copy protection on the CDs which prevents the import operation? cheers, tony