Martyn77

Ive driven the car quite a few times since and everything appears normal now. (History: Following cam belt and water pump change on the Thursday afternoon I drove home about 3 miles from my normal garage. On the Friday morning at start up the rattle was evident so I returned to my normal garage and the mechanic told me it was the flywheel and I could see the engine vibration for myself. So I took it to another garage on his recommendation for verification and they road tested it. I left it with them overnight for them to cold start it the following morning and they could find nothing again.) As it's under warranty and as you've said a costly job. I want to solve this before the warranty expires. Any other ideas as to why its suddenly gone away?

I will be paying

Hi Gareth..I took it to another independent garage after my own highlighted the problem..and they couldn't find a problem. So I'm going back again to the other garage to see if they can find the problem.. IT is covered under the warranty but obviously if its not apparent now what do you recommend..because once the warranty finishes (April 20th). It will be paying. Thanks.

Hi Gareth.. I bought the vehicle used.. last December. But I forgot to mention the following if it has a bearing on my problem?.. I had my local Garage do an oil change and I was informed that the oil had not been changed recently when my mechanic removed the sump nut.. I was surprised as the dealership I bought it from assured me that an oil service was done along with a new MOT.... I also had my mechanic change the Cam belt and the waterpump... and the rattle appeared the following morning on start up. I went straight away back to him..and it was he who told me of the flywheel vibration and I saw this myself looking at the engine. However..I have not heard it since and the car seems to be driving OK. Or is this an intermittent thing that will only get more pronounced and amplified over time?..Your thoughts would be appreciated. Martin.

Thanx Magnet.

Also... If anyone has any ideas as to why the DM flywheel is failing? (resulting in engine and ride vibration) I would be very grateful for your expert comments. Thank you all.

Thanx Gareth. I suspected this might be the best option. Fortunately it's still under warranty but whist the DMF is covered I'm not sure the clutch assembly is. So if the clutch has experienced any damage upon removal because of this...my garage will enlighten the insurers. However its a No brainer to fit a complete new clutch assembly whilst doing the replacement DMS given the car has done 57k miles. Once again thank-you Gareth.

As per topic title 2L tdi Sline. All feedback would be appreciated

Because that's the best company in my opinion and experience. Remember this is NOT a remap!! ..IT is an addon Chip. Read the testimonials and instructions on their website.

Absolutely NOT!!!.. I purchased a unit from them 6 years ago for my 2010 A3 2lt tdi. I have recently returned it to them for an upgrade as I have now puchased a 2016 A3 2lt tdi. The fuel consumption dropped dramatically and the BHP increased dramatically with much added torque through all gears with the unit. Just go on the "Chip Express" website to see for yourself. Regards Martyn.

Yes I'm Martyn 77.

Before you Remap your Q5... is it a diesel? DO NOT Remap it!! The risks of ECU failure and future associated damage to the Engine and Gearbox are very high. My advice is to contact "Chip express" on their website... where all will be explained... clearly and honestly.

Before you Remap your Q5... is it a diesel? DO NOT Remap it!! The risks of ECU failure and future associated damage to the Engine and Gearbox are very high. My advice is to contact "Chip express" on their website... where all will be explained... clearly and honestly.

Hi Granola, Followed your clear instructions to the letter. This solved the problem immediately. So grateful for that. Best Wishes for Christmas and the New Year. Happy Audi motoring to everyone. 🚗

Thanx Granola, I will follow your instructions and get back to you asap👍

On my 2016 A3 2.L tdi s/line Any ideas as to what is causing this ? and remedy solution would be appreciated.

I have a 2016 A3 S/line 2 L diesel Tdi Can anyone help me? Does the ABS control the tyre pressure monitor system (TPMS) ...or do the original factory fitted 18"alloys have TPM Valves inside them?... There is no fault on the system its purely a question... as my local garage were in the dark about this! Hoping one or more of you geniouses out there can advise me. Thanx in anticipation.

I had the same problem with my 2010 A3 sportback 2l diesel.. except mine starts and runs as normal. Dash clocks sent away for investigation and repair. No fault found. Cluster returned, refitted everything now working fine again. Conclusion..Intermittent fault. Anyone with any remedy to fix this permanently.. rather than removal and reconnection should it happen again would be appreciated.