Hi, new to the forum so hello everyone. I have a 2012 a4 avant 2.0tdi b8. Ive got some errors on the dash, and it goes into limp mode until I turn the car off then back on again. Ive plugged it into my vag-com and get the following errors: Took it to a garage today and the dash lights were on and he said it might be a sensor on the crank, I'm no expert but I don't think it is that, as the engines running perfectly. Im thinking it may be the EGR as I've heard it could throw more errors up when it goes wrong.
01-Engine -- Status: Malfunction 001003-ABS Brakes -- Status: Malfunction 001004-Steering Angle -- Status: OK 000005-Acc/Start Auth. -- Status: OK 000008-Auto HVAC -- Status: Malfunction 001009-Cent. Elect. -- Status: OK 000015-Airbags -- Status: OK 000016-Steering wheel -- Status: OK 000017-Instruments -- Status: OK 000019-CAN Gateway -- Status: OK 000042-Door Elect, Driver -- Status: OK 000044-Steering Assist -- Status: Malfunction 001046-Central Conv. -- Status: OK 000047-Sound System -- Status: OK 000052-Door Elect, Pass. -- Status: OK 000053-Parking Brake -- Status: Malfunction 001056-Radio -- Status: OK 000062-Door, Rear Left -- Status: OK 000072-Door, Rear Right -- Status: OK 000077-Telephone -- Status: OK 0000-------------------------------------------------------------------------------Address 01: Engine (J623-CJCB) Labels: 03L-906-018-CGL.clbPart No SW: 03L 906 018 JP HW: 03L 906 018 JLComponent: R4 2.0l TDI X25 9977 Revision: 45X25--- Coding: 12194012242401080000Shop #: WSC 30945 002 1048576ASAM Dataset: EV_ECM20TDI01103L906018JP 003006ROD: EV_ECM20TDI01103L906018AC.rodVCID: 010975ED90628C49C0-80546 Faults Found:4695 - Function Restriction due to Faults in Other Modules U1113 00 [032] - -Intermittent - Not Confirmed - Tested Since Memory Clear4698 - Function Restriction due to Faults in Other Modules U1113 00 [040] - -Intermittent - Confirmed - Tested Since Memory ClearFreeze Frame:Fault Status: 00000001Fault Priority: 6Fault Frequency: 20Mileage: 128237 kmDate: 2017.04.18Time: 10:37:43Engine speed: 595.50 /minNormed load value: 100.0 %Vehicle speed: 0 km/hCoolant temperature: 52 ∞CIntake air temperature: 12 ∞CAmbient air pressure: 1020 mbarVoltage terminal 30: 12.800 VUnlearning counter according OBD: 40Cruise Control System (CCS): switch position-Bit 0: 10000001 Cruise Control System (CCS): status-Bit 0: 11101100 Cruise control switch-off: irreversible-Bit 0: 00000100 Cruise control switch-off: reversible-Bit 0: 11111111 Cruise Control System: specified speed: 0.00 km/hEngine control module reset status-Bit 0: 00000000 Engine control module reset status-Bit 8: 00000000 Cruise control switch-off: irreversible w. brake intervention-Bit 0: 00010000 4699 - Function Restriction due to Faults in Other Modules U1113 00 [032] - -Intermittent - Not Confirmed - Tested Since Memory Clear4124 - Sensor Reference Voltage B P0651 00 [040] - Open CircuitIntermittent - Confirmed - Tested Since Memory ClearFreeze Frame:Fault Status: 00000001Fault Priority: 2Fault Frequency: 16Mileage: 128237 kmDate: 2017.04.18Time: 10:37:43Engine speed: 968.50 /minNormed load value: 23.9 %Vehicle speed: 0 km/hCoolant temperature: 52 ∞CIntake air temperature: 12 ∞CAmbient air pressure: 1020 mbarVoltage terminal 30: 12.880 VUnlearning counter according OBD: 40Exhaust gas temperature sensor 1: 134.8 ∞CExhaust gas temperature sensor 2: -0.0 ∞CExhaust gas temperature sensor 3: 170.4 ∞CExhaust gas temperature sensor 4: 167.6 ∞CShut-off timer: last engine shut-off time: 6 s4891 - EGR Valve (N18) P0403 00 [096] - MalfunctionIntermittent - Not Confirmed - Tested Since Memory Clear4087 - Engine Speed Sensor (G28) P0322 00 [096] - No SignalIntermittent - Not Confirmed - Tested Since Memory ClearFreeze Frame:Fault Status: 00000001Fault Priority: 2Fault Frequency: 9Mileage: 128236 kmDate: 2017.04.18Time: 10:36:37Engine speed: 1123.50 /minNormed load value: 1.2 %Vehicle speed: 10 km/hCoolant temperature: 59 ∞CIntake air temperature: 25 ∞CAmbient air pressure: 1020 mbarVoltage terminal 30: 13.620 VUnlearning counter according OBD: 40Engine start: start synchronization: EPM_MODE_BACKUP_CRSEngine start: start synchronization 2: EPM_FULL_SYNCCamshaft speed (RPM): 553.3 /minCamshaft position: start of phase window: 121.55 ∞Camshaft adaptation intake bank 1: phase position: 0.00 ∞Camshaft slope position: 0.00 ∞Crankshaft signal evaluation: status: TIMERMODE
