Jump to content

smphillips

Members
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • First Name
    simon
  • Location
    uk
  • Audi Model
    A4 b6 1.9TDI avant 101hp
  • Audi Year
    2003

smphillips's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Good point I will try and measure the others this evening, did not think of that
  2. Thanks Trevor for your response, i have been googling and found a measurement of 17.5 inches. Been out and measured mine at approximately 17 inches, probably should have checked other side for comparison. I am trying to order a kit of lower arms for both sides but having checked with the parts palce my registration has both sizes of ball joints listed against it. I have measured the thickest part of the joint and it measures 21 and a bit millimetres, assuming thats 20mm ball joints?
  3. Hi all, Hoping someone with a little more Audi experience could answer a question about Front suspension lower control arms. There is two lower control arms on my B6 avant 2003 1.9TDI 101hp model Audi, my question is are the curved control arms supposed to be the same length from side to side? I will tell you for why, I was driving to work on a wet cold morning and going around a corner the car slid on either black ice or oil and took a hit to the front left wheel on a curb. The front left wheel now does not sit centrally in the wheel well and to my eye looks to have more positive camber than the other side. I have looked under the car when i took in for tracking and cannot visably see anything bent, but the car pulls to the left. I have this evening measured the curved control arms and the left hand one appears to be about 1.5 inches approx shorter than the right hand one. Hoping the image attached helps clarify which arm i mean. Regards and thanks in advance Simon
×
×
  • Create New...

Forums


News


Membership