Search the Community

So, sick and tired am I of coming back and finding the most broken/busted up up typically two door Corsa or Renault Clio parked next to me. I park so far away from a store front yet, 'someone' always tends to be right next to me when I get back. I wouldn't mind as much , one individual parked so close I couldn't get in the drivers side (P££s taker), that said there were nearly 100 empty spaces. Only to find it was an 80 yr some odd old lady who said she was having difficulty in parking..Whaaaaaat!!! :|) Anyway for no reason than that, I have finally succumbed to ensuring whomesoever whacks, prangs or clouts the A7 I want it captured, such is the paranoia of not wanting a 'fast repair' company to sort out the open door crease in the side of the car. and to keep my No Claims Down if I really have to claim. Anyway my first place was flEbay - there have some decent deals at the mo, looks like Audi got a boat load they need to shift. I am now going to reside into darkened room whilst I plan my install - once I see words like remove A pillar, b pillar c pillar im capable but not daft I wanna trash the internals. I have attached the preparation list below - if anyone else is up for the challenge - I'm going to definitely try to not to pay Audi £360 for two hours labour The install instruction refer to other instructions which I guess are AUDI technician references - damn I need them #232504331893 is where I got mine including wiring harness, front and rear camera and "installation instructions but not fitters instructions - I made a best offer :) saved £10 So if anyone else taking on this task gimme a shout please, when I install Ill do my best to document and take pics as I do it. (just not today)

Second hand, but VGC. Genuine Audi/VW part. £60 ono.

Hi, complete newbie to the site and just hoping for some help with a strange issue. Firstly, after hours of searching I can’t seem to find anyone who has the same problem as I’m getting, so seems rare. My cars has just had a MeyleHD full suspension kit fitted, plus new coil overs. about 3 months after this my car failed mot on the front upper control arms, mainly the rear ones. They literally moved up and down a CM in the socket of the upright. So these were replaced for another pair of control arms, same thing happened 3 months later, passed mot when fitted but failed again inside 3 months. Loose in the ball joint socket. Note that the ball joints themselves have not failed, the arm itself is moving where the pinch bolt should have grabbed it. Has anyone had anything like this? Or any ideas on how to overcome without buying new uprights?... Any help would be greatly appreciated as everywhere I look I hit a dead end :/

Hi, need some help, i have a noise coming from the front offside wheel area (as in video) i have replaced upper struts, lower control arms, droplink, balljoint, wheel bearing, inner and outer tie rod, still no joy, car also seems to pull at times like tram lining, any ideas? 20171223_151021.mp4

Hi all, Hoping someone with a little more Audi experience could answer a question about Front suspension lower control arms. There is two lower control arms on my B6 avant 2003 1.9TDI 101hp model Audi, my question is are the curved control arms supposed to be the same length from side to side? I will tell you for why, I was driving to work on a wet cold morning and going around a corner the car slid on either black ice or oil and took a hit to the front left wheel on a curb. The front left wheel now does not sit centrally in the wheel well and to my eye looks to have more positive camber than the other side. I have looked under the car when i took in for tracking and cannot visably see anything bent, but the car pulls to the left. I have this evening measured the curved control arms and the left hand one appears to be about 1.5 inches approx shorter than the right hand one. Hoping the image attached helps clarify which arm i mean. Regards and thanks in advance Simon

Can someone please tell me the best way to remove the front headrests. I've searched the web and there's a lot of confusion about this normally simple exercise :( A3 2 litre TDi Sport, February 2012 TIA

Wanted I am trying to give my 57 plate a3 a s3 facelift. Its a 5 door and i require parts such as: - alloys - side skirts - bumpers - grill - lights - seats please contact me if you have anything suitable. Best Regards Sol 07947175586