All Activity

yes sorry i did not include size it is 215/40z/r17 i have been told there are a few other wheels and makes that can be fitted that will not effect my speedo ?? is this correct , thank you cheers

Just one way of you getting the roof down to enjoy the sunshine

It cost £65. plus £5.00 for an SD card. There was no guarantee but from the evidence in this thread and others (I was actually was led to VAG Car Coding via a thread on Audi-Sport.net) the chap at VAG Car Coding was 99% sure it was a 'patch' that was required, and he was right. I decided to take the risk of buying the 'patch' which was worth it and cheaper than local main dealer, who wouldn't have found the problem, for the quoted inspection fee of "£140 for the first two hours"

Interesting. How much did the company charge for your solution? Was the fix guaranteed?

What is the vin number?

Hello guys, hope you are enjoying the life a bit 😄... First time posting here I have an Audi A6 Competition 2016 3.0 BITDI (326hp). I have more than a year tracing an issue. I’ve been having a strange issue with my car during colder weather (around 4°C to 18°C) and was wondering if anyone else has experienced something similar. On a cold start, the engine fires up just fine. The idle RPM is slightly higher than normal(see the image attached higher_cold_rpm.jpg and normal_cold_idle.jpg). However, if I press and hold the throttle to bring the RPM up to around 1200–1400, the engine starts shaking and the RPM fluctuates up and down.(see the video issue.mov) If I try to do the same thing, it is gone and everything is normal except the high idle RPM which is 900 RPM and after 2-3 minutes it drop to 820-850 and after 5-8 minutes it drop to 800. Also a unpleasant smell comes out from a car's exhaust(maybe wrong air/fuel mixture) On warmer weather I don’t have this issue at all. The idle is still slightly high(the same as on colder weather) on cold start, but there's no shaking or RPM fluctuations when I press the throttle. From the past, the normal engine RPM after a cold start should be a bit higher than 800 RPM(maybe 820-850). Now the idle RPM is 900 RPM and after 3-4 minutes it drop to 820-850 and after 5-8 minutes it drop to 800. So far I’ve checked: No error codes stored (I scanned with a diagnostic tool – nothing came up) Injectors tested and all are within the spec Throttle body cleaned (minor carbon buildup, nothing major – cleaned the whole area shown in the image engine.png except the EGR Valve) What do you think I need to do next of if anyone else has experienced something similar what did you fixed? Thank you guys Flori issue.mov

Micro switches are often the culprit with these. Are you able to tackle this yourself if you know what switch/s are at fault? If not, I would be searching Classic car trimmers in a doable radius - they are often versed in issues with such things. ‘If I lower it (manually) what would that do’? The same end result as if you did it electrically! Regards, Gareth.

If I can lower it, what would this do?

The manual control should be in the boot on one of the side panels. I think you're right with your diagnosis

Hi Steve, I'm sure theres a way to manually close and open the roof however I haven't tried it. I believe the issue is related to the switches inside the latching mechanism that are !Removed! - the motor has rapidly degraded in speed to open/close as well.

It useful for ANYONE because he sends out the relevant software to the customer, so geography is not an issue.

Can you lower it manually?

They should just be revisions the M being the newest.

It's summer and my roof is ironically unusable; ran a vcds to figure whats wrong and still lost. Has anyone one else come across / solved this issue with their convertible before?

Thank you. No Bose labels anywhere. Non-Bose system then. According to various sources: standard amp is available with following part numbers: 4F0910223H 4F0910223K 4F0910223L 4F0910223M Can anyone advise if any amp above can be connected to MMI system? What is the difference between these?

Definitely need more details but I'd consider the thermostat especially if the temp gauge is fluctuating or not rising to 90 degrees.

You're most welcome, glad you got sorted 😊

Definitely looks good

Bose would be listed in that list, also Bose labels will be on the speakers.

List of PR codes if anyone can help to identify which audio system it is: Bose or standard Audi? PRCode: 0G1 = Gearshift lever PRCode: 0JH = Weight category front axle weight range 8 PRCode: 0YH = Weight range 8 installation control only no requirement forecast PRCode: 1BA = Standard suspension/shock absorption PRCode: 1KD = Disc brakes rear PRCode: 1LT = Disc brakes front PRCode: 1N3 = Speed-related variable steering assist (Servotronic) PRCode: 1SA = Without additional engine guard PRCode: 1X0 = Front wheel drive PRCode: 2K1 = Reinforced bumpers PRCode: 2ZQ = Leather trimmed multi-function steering wheel for air bag system PRCode: 3FA = Without roof insert (standard roof) PRCode: 3L3 = Manual height adjustment for front seats PRCode: 3NZ = Rear seat bench unsplit backrest split folding PRCode: 4GP = Windshield in heat-insulating glass withsunshield and viewing window for vehicleidentification number PRCode: 4K2 = Radio remote controlled central locking SZV PRCode: 4KC = Side and rear windows in heat-insulatingglass PRCode: 4R4 = Power windows with comfort operation andcircuit breaker PRCode: 4UF = Driver's and front passenger air bag with front passenger air bag deactivation PRCode: 4X3 = Side air bag front with curtain air bag PRCode: 5D7 = Carrier frequency 868 MHz without panic button PRCode: 5SJ = Left exterior mirror: convex PRCode: 5TD = Decorative aluminum inserts PRCode: 6TS = Right exterior mirror: aspherical large viewing field PRCode: 6XD = Exterior mirrors: electrically adjustable/heated PRCode: 7GN = Emission standard EU4 DPF preparation PRCode: 7K0 = Without tire pressure warning light PRCode: 7Q2 = Navigation system with color screen PRCode: 7X0 = Without park distance control PRCode: 8BF = Halogen headlight for driving on the left PRCode: 8GV = Alternator 180 A PRCode: 8Q1 = Headlight-range adjustment PRCode: 8Z5 = Not hot country PRCode: 9Q4 = Multi-function display/on-board computerwith check control PRCode: C1X = Alloy wheels 7.5J x 17 5-arm spider style offset 45 PRCode: D3X = 4-cyl. turbo diesel eng.2.0 L/103 kW 16VTDI with pump-jet injection system base engine: T9G/TB3/TM0/TP0/TC3/TD3/TQ0 PRCode: E0A = No special edition PRCode: F0A = No special purpose vehicle standard equipment PRCode: J0Z = Battery 520 A (110 Ah) PRCode: Q1A = Standard front seats PRCode: TQ0 = 4-cylinder diesel engine 2.0 L unit 03G.D PRCode: U1B = Instrument insert with mph speedometer clock tachometer and trip odometer PRCode: X2B = National sales program Great Britain

Private purchase, no joy. How to tell if my system is Bose or standard Audi? would these use different connector? Picture of a connector if you can tell?

After spending a fortune the garage said they cant fix it. Went to another place and straight away found it was issue with egr coolant sensor. Replaced that and back to normal running temp and stays there. No happy i wasted money and weeks with those other morons.

Well done.

Right guys, I sent all 6 injectors off to be tested, low and behold, injector 3 has zero flow on idle. Got it rebuild, fitted it this evening, and I've got a smooth idle! Took it for a drive, no fault codes and no lights. Low rail pressure seems to have disappeared now too. Just want to say a massive thank you to everyone that gave advise. I can finally get back to work now 😂! Cheers once again!

No it’s the s3 with the issues. Great colour and looks well for a 2017.