I have an android 10.25 inch head unit I wish to install.I started the install today but before installing properly checked it worked ok which it was.However I ordered a cable as mine has the hazard button and passenger airbag light.Has anyone fitted one of these as unsure how to connect it as there two sockets on cable I had to order one to the hazard switch and one to the airbag but only one socket.Do i just connect the airbag one like i have in the picture but dont understand why there are two.

Finally installed the head unit you plug airbag end into Original button and the other into new hazard light button.Really impressed with the unit upto now

On 9/26/2023 at 5:54 PM, Simon Bailey said:

Finally installed the head unit you plug airbag end into Original button and the other into new hazard light button.Really impressed with the unit upto now

So you've basically hidden the original button with passenger airbag lamp some where inside the dashboard, correct?

Yes that is correct

I have the same problem, i don't know where to plug ?

If i remember right your original you plug one end into the original button and the other into the new button.You hide the old button in the dash behind the new install

 

Hello everyone, 

running into an issue with the installation of the Xtrons Module: I have installed it, module works flawless but the airbag control lamp is on continuously. I have a Q5 from 2013, without a possibility to switch off the passenger airbag.

Anyone ran into the same issue or has an idea?