Testing injectors

[bt80k]

Hi I'm want to quickly test that fuel is not only reaching each injector but they don't leak and the spray pattern is ok. I did this some years ago but old age and lost info has left me needing my memory jogged 🙄 so after popping each injector and resting them in seperate jars I know I have to pull the relay and use the bridging tool then after raising the flap on the metering head I can time and measure but which relay and what position to put the bridge is where I've gone blank.

91 80 16vq

Cheers

Edited Sunday at 01:15 PM by bt80k
Added car details

[bt80k]

This is sorted now I pulled relay 208 pulled the injectors bridged the relay and lifted the flap on the metering head. Eventually got a good delivery of fuel from each injector. But no spark back to it.