Jump to content


Beany1

Established Member
  • Posts

    110
  • Joined

  • Last visited

Everything posted by Beany1

  1. Its on both sides and thats the water you can see the black patch on the floor
  2. Is this normal for water to drip from here its on the front wheel behind the front wheel coming from the arch side skirt area
  3. Just got my car sorted today took it to alternator specialist had alternator refurb done with new brushes new bearing and new pulley £80 sounding nice and quiet now thanks everyone who advised me really apreciated
  4. Ye gonna get it tested if i need to replace it will go with a valeo or a bosch thanks gareth
  5. Hi gareth thanks for the info will look into the alternator and no the clicking only started a few days ago . The belt i changed about a month ago coz it started squeeking and the belt was glazed so i changed the tensioner and idler pulley at same time
  6. Ye sorry stevey does the alternator voltage seem right then and thinking its the pulley at fault
  7. Ok thanks magnet for the info what is the alternator supposed to be reading with engine on with load on and off thanks
  8. Ive had new belt idler pulley and tensioner replaced about a month ago . The cars making a clicking noise and engine shaking when i put headlight on putting load on alternator thinking could it be the alternator pulley as alternator is reading 14.1 v and with headlight on its 13.7 v so thats ok so maybe the pulley gone
  9. It only makes ticking noise when i put headlights on when i switch the lights off the ticking stops and the car vibration stops
  10. Hi steve had diagnostics done all good jus came up with glow plug cylinder 4 circuit p0674 had a carbon clean too for 40 pound
  11. Cheers for the heads up kev jus cancelled the carbon clean and jus getting diagnostic done thanks
  12. The guy said it goes in your airbox or something and cleans all the carbon gunk out
  13. Thinkining about having carbon cleaning done today and full diagnostics
  14. Ye makes sense did have a look at the passenger side mount the one with sensor does look like its got a little crack does it mean when it gets hot the oil gets thin and gives more vibration and yes there is no problem on the revs its stable just under 1k is it good idea to check if my snub mount is centered and not touching the snub mount cradle will that cause vibration too thanks
×
×
  • Create New...

Forums


News


Membership