All Activity

The only thing I have had similar was that the cooling system was blocked on a 2017 passat, it ended up being the silika bag in the coolant bottle had burst, it blocked the matrix and the cooling system.

Untill the new wheels arrive, I have put the old ones back on. I am undecided on the color, but the new wheels are bronze so the black calipers may look OK.

I think I’ve fixed it! I noticed that the option to deactivate the digital key in the MMI settings was greyed out (I guess because there was no digital key setup). So I re-added the digital key to my phone and was then able to deactivate it in the MMI. So now, whilst I now have the digital key in my iPhone’s wallet, it doesn’t work by me just walking up to the car and opening the door. And also, once in the car, I am no longer getting the message to set up a digital key.

Hello Martin, It wouldn’t surprise me that there isn’t, but well worth passing it passed your selling dealer for confirmation or refuting. Perhaps you could update us on how you get on. Kind regards, Gareth.

I’ve recently purchased the Edition 1 version of the A5 Avant, having previously had an A6 Avant, and I love it! I originally set up the digital key on my phone, but have since removed it - the thought of someone stealing my phone and then being able to just walk up to my car and drive it away didn’t appeal to me. Anyway, I also use a crooklock, so will need to carry my key around in order to unlock it. Since removing the key from my phone, every time I drive the car, there is a message on the MMI, with a mortarboard hat at the start, telling me to activate the digital key. I don’t want to, but can’t find any way of turning off this message! Any ideas? Thanks

Hello Dave, Worth placing a wanted advert in magazines such as Classic Car Weekly and similar publications. Also registering your want on on line car breaker websites such as Partsfinder - there are more. Kind regards, Gareth.

Can anyone help - my A4 Avant 2016 is blowing cold air in footwells but warm through all other vents! surly it cant be the heater matrix as this would have cold air in all vents? Any suggestions? Thanks

Could you post some more pics from other angles please Tom.

Jumps out of gear and "Gearbox Malfunction" appears on dash. Sometimes works for a little while before this happens. Scanned with VCDS and I am getting 20888 - Pressure Control Solenoid 1 - P0748 error. I have replaced the ATF, motor, filters and all the solenoids. Does anyone have any experience with these.. could the TCU be faulty or is there another hardware element within the ATU which could be at fault. -- VCDS OUTPUT -- Address 02: Auto Trans Labels: 0CJ-927-156.clb Control Module Part Number: 4G0 927 153 L HW: 0CK 927 156 Q Component and/or Version: 0CK 20TDI RdW H01 0002 Software Coding: 100001 Work Shop Code: WSC 02391 785 00200 ASAM Dataset: EV_TCMDL382021 002014 (AU57) ROD: EV_TCMDL382021_AU57.rod VCID: 323AC2AFE4A6AE7A99F-8066 1 Fault Found: 20888 - Pressure Control Solenoid 1 P0748 00 [10101111] - Electrical Malfunction MIL ON - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 1 Fault Frequency: 8 Mileage: 332432 km Date: 2000.00.00 Time: 00:00:00 Engine RPM: 0 /min Driving position: d ATF temperature: 14 ∞C Transmission output speed: 0 /min Voltage terminal 30: 12.7 V Engine torque: 0 Nm selected gear: N Ctrl. mod.: operating condition: regular operation Auxiliary pump for transmission: requesting function: Fill hydraulic press. accum. Auxiliary hydraulic pump for transmission oil: current: 4 A Oil pressure reservoir: pressure: 0.7 bar Pressure of clutch 1: actual value: 0.0 bar Pressure of clutch 2: actual value: 0.0 bar Clutch status: New Unlearning counter according OBD: 40 Occurrence_counter_over_length_of_life: 206 -- Thanks!!

Hi Due to the fact that the radio did not fit I have sent it back, so can't really say about the sound quality. Sorry.

I think sometimes you have to get a fascia adaptor to get a good fit. I'm hunting one for a 2003 A6 as I really fancy a modern head unit but don't want it to look like it was fitted by a five year old. How are you finding the head unit, are they as good as they look?

Any good? HEIZUNGSGEBLÄSE GEBLÄSEMOTOR INNENRAUMGEBLÄSE MAXGEAR 57-0010 A FÜR AUDI 100 | eBay UK

The porsche calipers fit good, the front wheels have been ordered. The only issue is that I have had to fit the left on the right and right on the left, due to them coming from a porsche which had them at the front of the hub carrier.

Hello there, I owned an A class 250e from 2021 which I later on swapped for the A3 45 TFSIe and both made this exact same noise. Both were used cars when I bought them but my service car at work is a 330e from 2024 brand new and it started making the exact same noise after a couple of months. It must be debris that get into the breaking pads. If you clean the breaking pads the noise will stop for a while but it will eventually come back. I drive all the cars on EV mode most of the time but if I turn the engine on its barely noticable.

Hi all, I’ve got a weird one. My locking confirmation via horn doesn’t work, the option is enabled properly on the dash but it just doesn’t want to work. It hasn’t worked since I got the car (February) but I do really want this feature haha. I’ve seen a few things about coding it in via vcds, but since this option is already displayed in my dash I shouldn’t need to bother with that right? The possible clues I have is my alarm siren doesn’t work (has been replaced in an attempt to fix it, but since the confirmation is via horn it shouldnt affect it?) and the rear doors have that age old vag problem where they dont open from the outside after unlocking the car, but opening from the inside and then shutting the door will allow you to open it from the outside until the next time you lock it. Really hoping someone can hit the nail with this one!

Hi everyone, I've got a lovely old Audi 100 Quattro 2.8E from 1994. Sadly the bearings have gone in the interior blower, leading to horrible noises any time I try to use the climate control. I tried to source a replacement part, but the one that was sent has a different mounting to what's in my car. I can see one number on the old blower, but web searches don't seem to find anything for it: 3135102138 I ordered one of these from autodoc.co.uk: 2669I0008 RIDEX Interior Blower for vehicles with/without air conditioning, for left-hand drive vehicles for AUDI 100, A6 | AUTODOC price and review but it doesn't fit - on my original blower (see "old fan side" and "old fan back") the electrical connection is off to one side, whereas on the RIDEX one I was sent it's in the centre (see "ridex fan"). Does anyone have any ideas about how to track down the correct model? I've tried using OEM searches such as Blower Motor & Fan for 1994 Audi 100 Quattro | OEM Parts Online - that suggests I should be looking for part 4A0-959-101-A - but that seems to take me to things similar to the RIDEX blower that doesn't fit. Any clues welcome... Tom

Hello guys my 25 Audi a6 40 TDi ( C8.5 ) has just done 4500 miles and the oil low message has popped up . is this one from Costco compatible with my engine ? Thanks in advance !

Thanks for this. Seems like it's the only option to get at the bolts behind the hub!

Thanks for the reply, I'll give it a go if can't find a drain somewhere

Pretty sure you'll need to undo drive shaft bolt and remove lower balljoint so you can withdraw driveshaft and CV from hub to see. A wobble impact triple square is handy. See videos for Dave Sterl on YouTube. He's done A4, so can't see A3 being different. You'll need a new driveshaft bolt, and torque with wheel off the ground. Bearing wise, F.A.G. every time. Make sure hub face is spotless before fitting. Wire brush attachment on a drill, that sort of thing.

I guess what you are feeling is crystallised Adblue, which is a common problem in such systems, and presumably why you want to drain the tank. In theory Adblue, which is principally urea, is very soluble in water so it should be possible to flush the crystals out with a stream of cold water. However I have never had anything to do with Adblue in my car so I do not know how practical the idea would be.

Good morning everyone, It's been a while since I last posted on here. But once again I require the help of the experts. For whatever reason I need to drain my adblue tank. I have looked on line, tried putting a line down the filler neck but it just doesn't feel right. There seems to be something stopping the pipe going down and there are what I can only describe as ridges. Does anybody know if there is a drain plug or do I just persevere with the filler neck and syphon it out. Thanks in advance to any and all who can help Simon Sorry guys should have said car is 2015 A4 2.0tdi 163 ultra.

Check the earthing of the lamp unit.

Nice! Subtle mods for the win 😎