All Activity

Just an update, I've got hold of a audi tech as a foreigner and he has told me the one I ordered is general part and not the exact audi part no. This has now been ordered and should arrive on Monday. But I now have a power steering warning light as well, I'll keep the thread updated and if the new ring fixes my problems I'll place the part no in the feed

Glad you got it sorted out.

Its with an auto electrician atm so I'll let him know to double check that Thanks buddy ill let you know if it works or what the issue was otherwise Best Saad

Dean. You are not going crazy, and the technician is talking rubbish by saying it is normal. That's not to say the creak indicates anything unsafe, but the noise would irritate the hell out of me. I suspect the rubber bushes in the front steering and suspension links, despite the claim that some have been renewed.

It may well be that simple, but get it tested to be certain. And if the battery does need to be renewed, ensure it is coded to the car to ensure it is charged correctly.

I used to keep getting the same problem on my '04 A3. It used to happen every time I gave my mate a lift (putting it politely he's generously built). Turns out when he put the seat all the way back it was undoing the connector under the seat. Could be worth a look if you put the seat back to work on the blower.

Thanks mate So it might be as simple as just replacing the battery?

Bet you can't wait for it to get dark so you can try them out! Seriously though, they make a huge difference.

If the battery is more than six years old there's a good chance it is defective, and therefore responsible for the dim lights etc. Get it tested by an auto electrician. Do not use a simple voltage meter as it will not reveal internal defects in the battery.

Hi guys I found a reversing bulb that doesn’t throw up a fault code on my dash on my 2010 A3 8p it’s made by Aslent (China) it’s a P21W fitting

Hi guys, I have a 2010 Audi A3 S-line........ I have a Airbag light which wont go away, any ideas please?? I have just changed the Heater blower motor so I guess one of the connections to the glove box which I had to remove was for the airbag, but all put back together now and its still there!!

Update: I ended up needing a new heater blower motor for this, thanks for the help guys..

So an update on readings. Been back out to do a better job of recording voltages. Multimeter on car ground to the following pins: with ignition on but not running Pin 1- 4.98v Pin 2- 0v Pin 3- 12.19v Multimeter on car ground to the following pins: car running Pin 1- 4.99v Pin 2- 0v Pin 3- 14.37v - 14.45v when rev'd Variance between pins 1 and 3 - 9.3v And pins 2 and 3 - 14.4v All seems normal yet something blows the maf sensor. Could the Multimeter response time be insufficient to pick up voltage transients? What am I missing here? If anyone could provide their voltage readings as a comparison it would be appreciated. If anyone has any ideas of what to look at next, that'd also be appreciated. Would different measurement equipment be more suitable? Oscilloscope?

Does anybody know the paint code for the Matt Metallic Grey Lower Skirt on the 2016 8V. I can't find a reference to this on any of the documentation. I assume this is a standard colour across all body colours? My body colour is Monsoon Grey.

Hello all, I bought an Audi A3 Sportback (2021) from a dealership and the sales consultants have been very helpful during the process and I can't say a bad word about them and they have said it to see a specialist technician from Audi/Volkswagen group. The issue I initially reported is that there is a creak/groan coming from the wheels and you can hear like a bed spring inside the car when turning, this is happening when stationary but also when in motion at times, it goes away at high speeds. The technician investigated this and said no issue was found and he even invited me to a test drive to see but he said it's 'normal' and it's 'just tension' Past issues Recently repaired Suspension arm brushes (new) and gear selector The tech said "Two of us have both looked under the car and everything is good and tight" Please can you confirm I am not going crazy and that this is a genuine issue? undefined - Imgur.mp4 undefined - Imgur (1).mp4

I appreciate all the contributions in response to my post. And I take the information provided into consideration in the decisions I make. I will provide an update as an when there is new information to share. You don't need to try and prejudice what I may or may not do with my car.

Good luck Tom, hope it's nothing too expensive/serious, let us know how you get on mate.

Agreed, and no apology needed Gareth.

Hello! I have a manual 6 speed Audi A4 B8 2.0 TDI Quattro from 2012, its the facelifted version. I have enabled with VCDS the drive-select function on the MMI (MMI 3G) , but only Comfort and Individual modes are selectable. I have watched a video about this, it seems like the guy in the video enables an adaptation in 09 with a security key, which is 20113 , my VCDS software also tells me that the security key to unlock adaptation features in that module is 20113 , but if I type it in and press the "Do it!" button it gives me an error code , "Security key not authorised! , Error: Unknown (00) (0x00)" or something like this , and I can't enable multiple modes. (I know that it won't do anything I just want the interface of the driveselect in my car to look like and feel like an audi that has it.) Thank you in advance for the help! Kind regards, David.

Hi all I have an audi A6 s line 2013 plate. The screen just randomly stopped popping up so I can't access anything I normally would on the screen. I've also noticed some of the lights on the buttons near the automatic gear shift are either dim or completely out. The image below is an example of what it should look like. i''ve taken it to a coding company and they initially thought i needed to replace the part with the cd but that didnt fix the issue. He put some power into the back of the cd compartment and the screen popped so its definitely a power issue somewhere, just no idea where. all fuses are fine and battery is fine. Any help please?

Please do, as this question crops up from time to time.

So we take it the asked for advice which results in:- Getting the alternator output checked. Getting the full battery efficiency checked. - has not been followed, and prejudging, is unlikely to.

I agree with you Brian, but it is proving difficult to persuade people away from the old argument that if the battery has 12 volts and cranks the engine then it must be OK. That was indeed true before the advent of electronic controls a few decades ago, but it is no longer a good enough criteria to judge the condition of a battery, as you and I and many others have discovered the hard way.

I haven't added an update as I don't have an update to provide at this point. Nothing has changed since my previous post.

I would put an agm 95 mah battery on it cured my stop start fault and epc warning light on 2016 a5 tfsi