Jump to content


2.0 TDI 170hp BRD injector errors


Diggy98
 Share

Recommended Posts

Hello guys, I have this problem with my car since I bought it. It doesn't pull like it should (it got a little better by replacing the fuel filter but it's far from 170hp) and in high rpm's (around 3500-3700) with the pedal to the floor it has a stutter, like it's running out of fuel (the fuel is not the problem, tried every petrol station in my area and I the level is always above half). There are two errors that keep appearing: 

2 Faults Found:

004720 - PD Unit Injector: Cylinder 4 (N243) 
               P1270 - 006 - Regulation Range Exceeded - Intermittent
             Freeze Frame:
                    Fault Status: 00100001
                    Fault Priority: 0
                    Fault Frequency: 1
                    Reset counter: 40
                    Mileage: 0 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 2368 /min
                    Torque: 64.0 Nm
                    Speed: 55.0 km/h
                        81.12 %
                    Text:  5.250    uF            
                    Text: 14.75    mJ             
                    Text:     12    mJ            
                    (no units): 0.0

004705 - PD Unit Injector: Cylinder 1 (N240) 
               P1261 - 006 - Regulation Range Exceeded - Intermittent
             Freeze Frame:
                    Fault Status: 00100001
                    Fault Priority: 0
                    Fault Frequency: 1
                    Reset counter: 40
                    Mileage: 0 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 2496 /min
                    Torque: 56.0 Nm
                    Speed: 58.0 km/h
                        80.34 %
                    Text:  5.250    uF            
                    Text: 14.75    mJ             
                    Text:     12    mJ            
                    (no units): 0.0

   Injector values seem to be good at idle (all of them between +/- 0.10mg/str), the car starts fine, idles fine, no smoke coming out so I don't know what to think. Did anyone have a similar problem?

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership