Changed the window reg on my q7 (driver's side) but for some reason when winding the window back up, it stops and opens half way again. I have to wind it back up clicking on the button a few times rather than pulling the button up in just one go. I have tried re-learning the power windows and checked to see if there was anything that was in the way but nothing.

Hi Zed

I replaced my drivers door window reg too and it did exactly the same thing.

I used a bit of silicon lube spray on the regulator tracks inside the door (yes, had to remove it, spray it and re-fit it) and that sorted it out.

Hope that helps (if not already sorted in the 2 months).

Cheers.

Chris.