Jazz2099 Posted February 16, 2014 Share Posted February 16, 2014 Hi there I'm a first time Audi owner :) I have just brought the A3 cabriolet 2010/11 model and I have noticed that after the high winds of late that the interior roof lining near the rear window has come adrift. It seems as though it clips back into place with some slide clips but I'm not too sure how exactly to go about this, I would greatly appreciate some advice if anyone out there has had a similar problem. That's a lot J :) Quote Link to comment Share on other sites More sharing options...
Audi Owners Club Posted February 19, 2014 Share Posted February 19, 2014 It may be that the clips are broken and simply need replacing although difficult to say without looking at it? Quote Link to comment Share on other sites More sharing options...
Jazz2099 Posted February 22, 2014 Author Share Posted February 22, 2014 It looks like it has come unstuck from the rear window across the top and bottom Quote Link to comment Share on other sites More sharing options...
Sarah4rings Posted May 27, 2014 Share Posted May 27, 2014 I have the same problem well annoying looks like cr** design to me poor show Audi :( Quote Link to comment Share on other sites More sharing options...
Vertible Posted December 17, 2018 Share Posted December 17, 2018 Hi, I have the same problem, just the top edge has come off, but my fault as I put some things on the back shelf and when i pulled them out, it dislodged the plastic bits holding the roof lining above the window, did you sort yours out? is it just clips that hold it up? how the heck do you get to it? any help would be appreciated please....thanks Quote Link to comment Share on other sites More sharing options...
Jazz2099 Posted December 17, 2018 Author Share Posted December 17, 2018 Unfortunately it resulted in a complete new roof Quote Link to comment Share on other sites More sharing options...
Vertible Posted December 17, 2018 Share Posted December 17, 2018 Oh dear sorry to hear that, I visited my local dealer this morning to see what the problem is, the tech said it needed gluing into position again, thankfully it’s only the top strip that has come off mine, i was surprised that it is sit glued in place though not a good design at all Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.