Jump to content


a6blacked007

Established Member
  • Posts

    166
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by a6blacked007

  1. 13 hours ago, a6blacked007 said:

    Exactly like mine.

     

    Guy on different thread says his wiring between abs pump and sensor was damaged So was replaced. 

     

    Still my fault pops up every so often.

    Spoken with @Asad and he replaced 

    Scanned with Odis. 

    AUDI A6 C7 2012 ACCELERATION YAW RATE SENSOR CONTROL MODULE 4G0907637

     Solved his problems 

  2. On 6/11/2023 at 10:20 PM, Joseph Attabrah said:

    Can anyone identify this problem? a few weeks ago I had the car service maintenance so I asked the dealership to change all the cars filters. After that, shortly a week later, the car started acting up with all the dashboard lights.
    could it be that the fuel filter could be wrong size or something ?

    The dealership said that the battery could be low or damaged so I bought a new battery and the car is still acting up.

    video attached below

     

    IMG_5623.mov 97.62 MB · 3 downloads

    Exactly like mine.

     

    Guy on different thread says his wiring between abs pump and sensor was damaged So was replaced. 

     

    Still my fault pops up every so often.

  3. 7 minutes ago, Daniel9944 said:

    So here again after a while, sorry it took very long but the guy I went to is so busy that’s how long I’ve waited. So turns out there was a broken wire after all even though it has been checked out first time they did not find it and this guy did now. He is 100% positive the faults will not come back and they haven’t yet but I don’t want to jinx it to be honest. He said the damage was so small that he barely found it and it takes a while but that was it. If them faults will ever come back I’ll update again! Until then problem seems to be solved for me!

    Do you know were broken wire was ? Can you find out 

     

     Regards mark

  4. Hi guys 

     

    My bumper trim is still sticking out took it off yesterday and plastic part holding it to metal wing is snapped/missing any ideas how to get it back to were it needs to be tried cable ties no luck 

    It's flush behind offending area and plastic. 

     

    Regards mark 20230519_112441.thumb.jpg.ebcc4cbbfbdf37b8cc6a7d5a4ea5bd80.jpg

  5. 14 hours ago, Stevey Y said:

    Hi which side is it, either way its the bit that the belt plugs in to give it a blast wit contact cleaner whilst working the red plunger up and down then give it some WD40 if that won't work then chaste wire that runs down the side of it to the junction box under the seat unplug it and clean that with electrical cleaner, that should cure it if not its a new seatbelt stalk.

    Steve.

    This would be my 1st port of call 

     

    ☝️☝️☝️☝️

    • Like 1
  6. 48 minutes ago, Magnet said:

    Thanks Mark. 
    ‘Anyone else had this issue?’ 
    If you know something has been stuck into yours, then it’s fair to say that’s what is wrong with it -? 
    Kind regards,

    Gareth. 
     

    Maybe worth taking it apart and having a look inside ...

  7. 15 minutes ago, amowolves said:

    Clear the errors and then move around in your drivers seat and see the errors pop up again. if they do check the connections under your seat. I also had a module attached to the underside of my seat which I checked the cabling to also.

    That's my plan for tonight buddy 👍

  8. Hi all 

     

    We have a a4 b8.5 saloon 2012 and everytime we start car it says cd player inactive please contact audi bla bla ...

     

    We don't even use it anyone else had this issue. 

     

    Maybe my lovely 3 year old has stuck something in there 🤔

     

    Regards mark

×
×
  • Create New...

Forums


News


Membership