TonyT Posted January 4 Share Posted January 4 Hi I’ve fitted a set of OEM audio xenon lights to my A4 using a wiring loom converter so everything ploughs in but the lights are flickering. Any advice? Thanks Quote Link to comment Share on other sites More sharing options...
Stevey Y Posted January 4 Share Posted January 4 49 minutes ago, TonyT said: Hi I’ve fitted a set of OEM audio xenon lights to my A4 using a wiring loom converter so everything ploughs in but the lights are flickering. Any advice? Thanks Hi are the lights second hand? as this kind of symptom is normally caused by bulb/ballast failure, the flickering is caused by a lack of voltage continuity in either module. Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 I have two of the same car just trying to switch the Xeons I’ve to the lower mileage one that I’m going to keep as it didn’t come with them from the factory we’ve swapped them over using wiring kit Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 Should’ve they just plug and play or do I need to get extra 12v power to them Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 46 minutes ago, Stevey Y said: Hi are the lights second hand? as this kind of symptom is normally caused by bulb/ballast failure, the flickering is caused by a lack of voltage continuity in either module. 46 minutes ago, Stevey Y said: Hi are the lights second hand? as this kind of symptom is normally caused by bulb/ballast failure, the flickering is caused by a lack of voltage continuity in either module. I have two of the same car just trying to switch the Xeons I’ve to the lower mileage one that I’m going to keep as it didn’t come with them from the factory we’ve swapped them over using wiring kit Quote Link to comment Share on other sites More sharing options...
Stevey Y Posted January 4 Share Posted January 4 3 minutes ago, TonyT said: I have two of the same car just trying to switch the Xeons I’ve to the lower mileage one that I’m going to keep as it didn’t come with them from the factory we’ve swapped them over using wiring kit Hi you mentioned wiring kit, is it a kit with Canbus control, also were the headlights from the donor car in use recently or have they been standing for a while, also which bulbs do they use? Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 They are 2 minutes ago, Stevey Y said: Hi you mentioned wiring kit, is it a kit with Canbus control, also were the headlights from the donor car in use recently or have they been standing for a while, also which bulbs do they use? They are fresh off 1 week ago the wire I bought of eBay https://www.ebay.co.uk/itm/282996012246?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1cNcucJ6SNO&sssrc=4429486&ssuid=2bgbqqtlrqi&var=&widget_ver=artemis&media=WHATS_APP Quote Link to comment Share on other sites More sharing options...
Stevey Y Posted January 4 Share Posted January 4 4 minutes ago, TonyT said: They are They are fresh off 1 week ago the wire I bought of ebay https://www.ebay.co.uk/itm/282996012246?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1cNcucJ6SNO&sssrc=4429486&ssuid=2bgbqqtlrqi&var=&widget_ver=artemis&media=WHATS_APP Hi having looked at the product its from a very reputable source, BUT if you read the advert for the cables it definitely states that they will need coding to the new car. Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 We’ve followed the instructions still no luck Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 I’ll give it another go tomorrow was just thinking will I need additional 12v power source Thank you V much Quote Link to comment Share on other sites More sharing options...
Stevey Y Posted January 4 Share Posted January 4 5 minutes ago, TonyT said: We’ve followed the instructions still no luck Hi the problem is that you have to see past the plug in and play bit, it is that way if you have the facility to code them in thats why the vendor offers that service in the description, the flickering is caused by the BCM trying to identify the new type of light by pulsing voltage but it can't achieve the correct voltage against its already learned voltage for the halogen units. Quote Link to comment Share on other sites More sharing options...
TonyT Posted January 4 Author Share Posted January 4 I understand that makes it clear thanks the guys have snap on and other software at the garage if it doesn’t work I’ll call The seller and take it from there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.