Just got my new 2.0 TDI S-Line and need to get my dash cam installed asap!

It's a Nextbase 312gw and I have the nextbase hardwire kit too. Is it easy to hide the wiring away and what fuse is best to attach the dashcam too?

Hi Luke

Welcome to the forum :D

Yes should be easy just hide the cables in crevasses like the gap between the window and pillars ect and I'm not sure about the fuse, sorry ;(

Regards

Bradley 

Hi Luke...welcome to the Forum

Here is a link to an article I wrote for the Nextbase Hard Wire Kit

http://www.drivn.co.uk/nextbase-dash-cam-hardwire-kit/

and also a review of the 412GW which gives some info which may be applicable to the 312GW

http://www.drivn.co.uk/nextbase-412gw-dash-cam-review/

The fuse you use is the one that is the same size as you remove, just make sure it is for an ignition fed component (such as heated seat, etc)

Cheers  Trevor

On 1/25/2017 at 9:21 AM, Trevor said:

Hi Luke...welcome to the Forum

Here is a link to an article I wrote for the Nextbase Hard Wire Kit

http://www.drivn.co.uk/nextbase-dash-cam-hardwire-kit/

and also a review of the 412GW which gives some info which may be applicable to the 312GW

http://www.drivn.co.uk/nextbase-412gw-dash-cam-review/

The fuse you use is the one that is the same size as you remove, just make sure it is for an ignition fed component (such as heated seat, etc)

Cheers  Trevor

Hey Trevor, thanks for that! I did have it installed using the kit in my previous car but I need to find out which fuse I can piggyback and where the fusebox actually is in the Audi? Which fuse did you piggyback?

I wired the dash cam kit into my Honda CRV so completely different but fuse wise, I would possibly go into the folding mirrors or something that is ignition switched.

Open the passenger door and look at the end of the dashboard there should be a panel there with the fusebox inside