Bilal akmal Posted January 31, 2018 Share Posted January 31, 2018 Hi everyone I don’t understand when I put new battery remote control key but I been reprogramme but not work I’m really tried try it maybe I need obd2 key programmer Quote Link to comment Share on other sites More sharing options...
bern Posted February 28, 2018 Share Posted February 28, 2018 May be worth trying putting the key in the ignition and pressing the buttons on the key while it was in there. Don't know if it will fix the issues but this reconnected my key after I had a flat battery and now works again. 1 Quote Link to comment Share on other sites More sharing options...
GrahamS4 Posted March 1, 2018 Share Posted March 1, 2018 I recently replaced the batteries in both my keys and just followed the instructions in the handbook and they work fine, did you follow the procedure to the letter as you need to do it in a certain time if I recall correctly? Quote Link to comment Share on other sites More sharing options...
bern Posted March 1, 2018 Share Posted March 1, 2018 Sorry by flat battery I meant a car flat battery, did not have any issues with the fob battery. The car had been sat for a while with a flat battery before I got it quite recently. Initially the key remote would not work. After putting the key in the ignition and randomly pressing the buttons it worked again. However sound like Graham says this is actually in the manual of how to reconnect. Quote Link to comment Share on other sites More sharing options...
Dennis K Posted April 29, 2018 Share Posted April 29, 2018 Hi Bilal, all you need is to put your key into ignition, turn on car electric and don't run engine. Next, hold unlock button on your key for at least 5-10 seconds and then take a key from ignition. That is it ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.