niedzial1983

@Rob82DZLSounds good . Ill see you there

Hi all Keep a place for me on a stand ! Is there a link to out club stand tickers or should i just buy from the web ?

Get a vcds scan to check for any faults first If your not far away from me (guildford ) i can scan :)

Problem is hardware - bt module does not support a2dp

Yep. Pull out the cover

Yes. So dension integrates fully with mmi and its controled via mmi controls and steering wheel buttons . And it does both streaming and hands free

Did you try to remove plastic trim , side panels of the dash as you open the doors?

I got a pair of osram cool blue d2s xenons bulbs . Changing them was a bit of a mission but the results are fantastic . What a diffrence !!!

Changing for new xenons is never a bad thing as the light output fades with time . I know when i changed mine i was shocked how well they work now :)

Tune2air works for on any device that has bluetooth. Plugs in to ami

Good luck :)

Usualy on audies there are on both ends of the dash as you open the door

Dunno then... check the voltage in the plug

probably first sign of failing . Get them replaced

What is the part number for the module that you had in the car and the one you bought ?

4th is mic?

For ami get tune2air for bluetooth streaming

What colour ? It usualy means xenon needs replacing if it goes a bit pincish...

It would do . It would stop mmi from working Also not all mmi2g had bt modules . Some came with a module to connect audi motorola phone that you would insert the sim in .

Prices vary .. I got mine osram cool blue d2s £60 a pair

It should be an easy job for a good car electician to connect the d3 seats .

Failing blast imo . But change xenon bulbs first just to be sure

Also if you will plug in the original module , plug in vcds and delete all faults. Switch off and on the car and do a scan again , any faults pop up?

Ok. Check that. If there is power and optic there it needs to work if the moule isnt faulty

Also with multimeter check if there is voltage in the plug going to the module