Itsa6carguy Posted July 22, 2018 Share Posted July 22, 2018 Help guys! right so thought I’d change the rear pads on my Audi. So I borrowed a Sealey OBD tool from a friend n started working on it. stupid mistake I made was that I didn’t release the Park brake before starting the job. Anyways after messing with the obd tool I ended up pushing the piston out! But before it came all the way out I managed to stop the system. Now I can’t get the Caliper to make the piston back in, and now have a fault with the Park brake highlighting the Caliper I was working on! please help a guy who thought he he could fix brakes and control my kids at the same time from completely messing up the car! Quote Link to comment Share on other sites More sharing options...
WPAWS Posted July 22, 2018 Share Posted July 22, 2018 @niedzial1983 Piotr can you advice Sunny? Quote Link to comment Share on other sites More sharing options...
niedzial1983 Posted July 22, 2018 Share Posted July 22, 2018 So you have done the change and the car is driveable? Is the obd tool for vag cars ? . You need something like vcds, obd11 or carista . Or a little trick there you connect epb motor to 12volt and revers + and - to wind in the piston Quote Link to comment Share on other sites More sharing options...
Critical_mass Posted July 24, 2018 Share Posted July 24, 2018 Im in Leeds and have VCDS AND did the rear brakes for the first time last weekend. Quote Link to comment Share on other sites More sharing options...
Critical_mass Posted July 24, 2018 Share Posted July 24, 2018 and by luck i have the laptop on me at work. Where in Leeds are you? Quote Link to comment Share on other sites More sharing options...
Critical_mass Posted July 25, 2018 Share Posted July 25, 2018 @Itsa6carguy still need help? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.